The SCM Series features AC speed control motors that utilized Oriental Motor's exclusive technology.Closed Loop Control for High ReliabilityEasy Installation and Simple Data SettingCompact Motor*Connection cables required (sold separately).
| product line | Oriental Motor® |
|---|---|
| motor type | AC Motor |
| motor | Induction |
| frame size | 90 mm |
| frame size(imperial) | 3.54 in |
| output power | 90 W (1/8 HP) |
| power supply | Single-Phase 220/230 VAC |
| frequency (hz) | 60 50 |
| current | 1.2 A [50 Hz] 1.3 A [60 Hz] |
| shaft/gear type | Parallel Shaft Gearhead |
| gear ratio (x:1) | 18 :1 |
| output shaft diameter | 18 mm |
| electromagnetic brake | Not Equipped |
| permissible torque | 11.3 N·m |
| permissible torque(imperial) | 100 lb-in |
| variable speed range (r/min) | 5 ~ 77 [50 Hz] 5 ~ 88 [60 Hz] |
| permissible load inertia | 620 x 10 -4 kg·m² |
| permissible load inertia(imperial) | 3400 oz-in² |
| permissible overhung load | 10 mm from Shaft End = 450 N 20 mm from Shaft End = 600 N |
| permissible overhung load(imperial) | 0.39 in. from Shaft End = 101 lb 0.79 in. from Shaft End = 135 lb |
| permissible thrust load | 150 N |
| permissible thrust load(imperial) | 33 lb |
| components | 5GVR18B , KII Series Parallel Shaft Gearhead (18:1) (Metric Shaft) ($134.00) SCM590GVR-EC , 90 W (1/8 HP) SCM Series Speed Control Pinion Shaft Motor (Single-Phase 200-240 VAC) ($180.00) |
| rohs compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| safety standards | c-UL CCC CE |
| ce marking | Low Voltage Directives EMC Directive |
| insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
| dielectric strength | Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
| temperature rise | A gearhead or equivalent heat sink is connected to the motor and the winding temperature rise is measured at 144ºF (80ºC) or less using the resistance change method after rated operation with no load under normal ambient temperature and humidity. |
| overheat protection device | Built-in Thermal Protector (automatic return type) |
| ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| ambient humidity | 85% max. (non-condensing) |
| altitude | Max. of 1000 m (3300 ft.) above sea level |
| thermal class | 130 (B) |
| degree of protection | IP20 |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Oriental Motor |
| Vendor SKU | SCM590GVR-EC / 5GVR18B |
| Lead Time | Estimated Ship: 10/22/2024 |