Turning Insert, Trigon, 4, WNGA, 2, CBN
| Item | Turning Insert |
|---|---|
| Insert Shape | Trigon |
| Insert Style | WNGA |
| Inscribed Circle | 4 |
| Insert Size | 432 |
| Chip-Breaker | No |
| Grade | BNC200 |
| Corner Radius | 2 |
| Insert Material | CBN |
| Insert Application | Finishing |
| Rake | Negative |
| ISO Number | 6NC-WNGA080408 |
| Mounting Style | Clamp |
| Cutting Direction | Neutral |
| For Use With | MWLN, DWLN Toolholders, A-MWLN, D-DWLN Boring Bars |
| Cast Iron (K) Compatibility | Yes |
| ANSI Number | 6NCWNGA432-BNC200 |
| No. of Edges | 6 |
| Insert Thickness | 3/16 in |
| Nose Radius | 0.0312 in |
| Workpiece Compatibility | Cast Iron (K), Hardened (H), Steel (P) |
| Super Alloy (S) Compatibility | No |
| Mounting Hole Dia. | 0.203 |
| Hardened (H) Compatibility | Yes |
| Steel (P) Compatibility | Yes |
| Stainless (M) Compatibility | No |
| Coating | TiAlN |
| Non Ferrous (N) Compatibility | No |
| Relief Angle | 0 Degrees |
| Clearance Angle | 0 deg |
| Cutting Material Coverage | Mini Tip |
| Finish - Machining | TiN |
| Cutting Application | Turning |
| Number of Cutting Edges | 6 |
| Included Angle | 80 Degrees |
| Insert Holding Type | Straight Hole |
| Thickness | 3 |
| Primary Material Application ISO Code | H |
| Through Hole Inside Dia. | 0.2031 in |
| ANSI Code | 6NC-WNGA432 |
| Primary Material Application | Hardened Steel |
| Shape | Trigon |
| Material - Machining | CBN |
| Features | Wear Resistant |
| Manufacturer Grade | BNC200 |
| Measurement System | Fractional Inch |
| Depth of Cut | 0.0150 in |
| Material | CBN |
| Package Quantity | 1 |