Isolation Transformer, 500 VA, Not Rated, 120V AC, 120V AC
| Item | Isolation Transformer |
|---|---|
| Input Voltage - Transformer | 120V AC |
| Mounting - Transformer | Desk Top |
| Hz - Electrical | 60 |
| IP Rating | Not Rated |
| Outdoor Rated - Transformer | No |
| Color | White |
| Output Voltage - Transformer | 120V AC |
| Number of Outlets | 4 |
| Temp. Rise | Not Rated |
| Cord Length | 10 ft |
| Includes | (4) Output Receptacles, Hospital-Grade Input Plug, Lighted Power Switch, Power Cord |
| Enclosure Type | Tower |
| Phase - Electrical | 1 |
| Standards | RoHS, TAA, UL 60601-1 |
| Height | 5-3/4 in |
| NEMA Receptacle Configuration | 5-15R |
| NEMA Plug Configuration | 5-15P |
| VA Rating - Transformer | 500 VA |
| Width | 6-1/4 in |
| Depth | 9-1/4 in |
| Let-through Voltage (Combination Wave) | 250V, L-N L-G: 250V N-G: 0.5V |
| Leakage Current | Less than 100 microamps |
| Protection Method | 1 X THERMAL, 2 POLE, ROCKER |
| Noise Suppression Rating | 35-65 DB |
| Cooling Method | Convection |
| Output Amp Capacity | 4.2 |
| Efficiency | 0.96 |
| Total Harmonic Distortion | Less than 1% |
| Let-through Voltage (Ring Wave) | 20V L-G: 20V N-G: 0.5V, L-N |
| Receptacles | 4 x NEMA 5-15R |
| Certifications & Standards | UL (UL Series AGIS500YWN) , cUL |
| Package Contents | IS500HG Isolation Transformer, Instruction manual with warranty information |
| Additional Information | Tripp Lite's IS500HG Hospital Grade isolation transformer offers line isolation, continuous noise filtering and enhanced common mode surge suppression., Internal low-impedence isolation transformer with Faraday shield offers 100% isolation from the input AC line, Full UL2601-1 medical grade listing with hospital-grade plug and outlet receptacles makes Isolator Hospital Grade transformers ideal for the protection of sensitive electronic equipment in patient-care areas., Reduces the cumulative leakage current of the Isolator and connected equipment to levels below 300 microamps., Secondary neutral to ground bonding eliminates common mode noise, providing an isolated ground reference for sensitive equipment, Serves as an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades, Removes EMI/RFI noise, utility switching transients, load generated harmonics and ground loops, Additional surge suppression components placed at the line input and output combined with full line isolation offers continuous filtering of a full range of power line noise in all modes, Active transformer filtering offers continuous common-mode noise rejection with no wearable parts, uniquely able to reduce surges in the worst of power environments to harmless levels, Reduces 6000V IEEE587 Cat A&B ring wave and combination wave test surges to only 0.5V common mode, Includes 4 widely spaced NEMA5-15R hospital grade output receptacles, a 10-ft power cord, hospital grade input plug, circuit breaker overload protection and lighted power switch., Rugged all-metal unit housing ships ready for upright tower placement in any industrial, medical, office or network environment, 2-year limited product warranty |
| Surge Energy Rating | 680 J |
| Power Cord/Cable Length | 10 ft |
| TAA Compliant | Yes |
| Plug/Connector Type | NEMA 5-15P |
| Product Certifications | UL 60601-1 |
| Input Cord Length (ft.) | 10 |
| Product Compliance | Trade Agreements Act (TAA) |
| Output Receptacles | (4) 5-15R-HG |
| Input Plug Type | NEMA 5-15P-HG |
| Package Includes | IS500HG Isolation Transformer;Instruction manual with warranty information |
| Over Current Protection | 1 x Thermal, 2 Pole, Rocker |
| Hospital Grade Outlets | Hospital Grade |
| Includes Circuit Breaker | Circuit Breaker Included |
| Package Quantity | 1 |