PDU, 3-Ph, Switched, 8.6kW, 21 C13, 3 C19, 0U
| Item | 3-Phase Switched PDU |
|---|---|
| Number of Outlets | 24 |
| Voltage | 208V |
| Cord Length | 0.91 m |
| Max. Amps | 24 |
| Mounting Style | Vertical Rackmount/0U |
| Housing Material | Metal |
| NEMA Receptacle Configuration | C13, C19 |
| NEMA Plug Configuration | NEMA L21-30P |
| Height | 70 in |
| Depth | 3.3 in |
| Width | 2.2 in |
| Frequency | 50/60 Hz |
| Protection Type | Overload Protection |
| Plug/Connector Type | NEMA L21-30P |
| Power Rating (Watt) | 8,600 W |
| Receptacle Detail | 21 x IEC 60320 C13, 3 x IEC 60320 C19 |
| Product Type | PDU |
| PDU Type | Switched |
| Product Name | Switched PDU3VSR3L2130 24-Outlets 8.6kW PDU |
| Package Contents | Switched PDU3VSR3L2130 24-Outlets 8.6kW PDU, Plug Retention Plates, Rack Mounting Brackets, Owner's Manual |
| Input Voltage | 230 V AC |
| Mounting Orientation | Vertical |
| Mount Type | Rack-mountable |
| Output Voltage | 208 V AC |
| Product Series | Switched |
| Reported Load Segments | Supports local monitoring of current for each output phase (13.9A max per L1-L2, L2-L3, L3-L1 balanced) and for each output receptacle; BANK "L1" is powered by L1-L2 (outlets 1-8); BANK "L2" is powered by L2-L3 (outlets 9-16); BANK "L3" is powered by L3-L1 (outlets 17-24) |
| PDU Plug Type | NEMA L21-30P |
| Material of Construction | Metal |
| Front Panel LEDs | Set of 3 LEDs (L1, L2, L3) indicate the output load segment the digital current display is reporting; LEDs for L1, L2, L3 will also flash to indicate that the display is reporting current level for one of the outlets in that load bank; One additional LED per output receptacle indicates power ON/OFF status for that outlet |
| Operating Elevation (ft.) | 0-10,000 |
| Package Includes | Switched rackmount PDU with pre-installed mounting buttons;Plug retention plates;Spare installation buttons (2 9mm / 4 6mm);Rack mounting brackets;Owner's manual |
| Output Capacity Details | 8.6kW (208V) total capacity; 13.9A max per output phase (L1-L2, L2-L3, L3-L1), 12A max per C13 outlet |
| Output Nominal Voltage | 208 |
| Current Measurement Accuracy (Amps) | +/-1% |
| Communications Cable | RJ45-to-DB9 configuration/console Access cable |
| Output Receptacles | C13, C19 |
| Input Cord Length (ft.) | 3 |
| Front Panel LCD Display | Digital display reports output load level in amps separately for each output phase and each individual output receptacle; Can also be used to scroll the configured IP address |
| Relative Humidity | 5 to 95% (non condensing) |
| Form Factors Supported | Vertical rackmount installation supported with included mounting brackets; supports toolless mounting in button-mount compatible racks |
| Power Measurement Accuracy (Watts) | +/-1% |
| Storage Temperature Range | 5 to 122 F |
| Frequency Compatibility | 50 / 60 Hz |
| Recommended Electrical Service | 30A 208V with NEMA L21-30R outlet |
| Network Compatibility | 10 Mbps; 100 Mbps (Fast Ethernet) |
| SNMP Compatibility | Yes, pre-installed SNMPWEBCARD provides remote monitoring via web, telnet, SSH and SNMP management systems |
| PDU Form Factor | Vertical |
| Input Phase | 3-Phase |
| Overload Protection | 3 20A double-pole circuit breakers (1 per output phase) |
| Input Cord Details | Cord length specifications are nominal and subject to manufacturing variance |
| Switches | SELECT switch advances the digital display and LED to report power consumption for load segments L1, L2, L3 and for each individual output receptacle (short press); SELECT switch also rotates the local display 90 degrees for overhead power input (long press); SCROLL IP button scrolls the configured IP address (long press) |
| Voltage Measurement Accuracy (Volts) | +/-1% |
| Unit Dimensions (hwd / in.) | 70 x 2.2 x 3.58 |
| Maximum Input Amps | 24 |
| Customized Load Management Receptacles | Each outlet is individually controllable via remote interface |
| Package Quantity | 1 |