Carbide Insert, Trigon, 2.5, WCMX, 2, Carbide
| Item | Carbide Insert |
|---|---|
| Insert Shape | Trigon |
| Insert Style | WCMX |
| Inscribed Circle | 2.5 |
| Insert Size | 2.522 |
| Chip-Breaker | No |
| Grade | UD51 |
| Corner Radius | 2 |
| Insert Material | Carbide |
| Insert Application | Finishing |
| Rake | Positive |
| ISO Number | 050308 |
| Workpiece Compatibility | Cast Iron (K), Stainless (M), Steel (P) |
| Stainless (M) Compatibility | Yes |
| Mounting Hole Dia. | 1/8 in |
| For Use With | UD DRILL |
| ANSI Number | WCMX 2.522 UD51 |
| Insert Thickness | 1/8 in |
| Steel (P) Compatibility | Yes |
| Super Alloy (S) Compatibility | No |
| Coating | TiN |
| Nose Radius | 0.031 in |
| Relief Angle | 7 Degrees |
| Application | Finishing |
| Hardened (H) Compatibility | No |
| Non Ferrous (N) Compatibility | No |
| Style | WCMX |
| Cutting Direction | Neutral |
| No. of Edges | 3 |
| Cast Iron (K) Compatibility | Yes |
| Mounting Style | Screw Lock |
| Insert Holding Type | Screw |
| Thickness | 2 |
| ANSI Code | WCMX2.522 UD51 |
| Primary Material Application ISO Code | P |
| Finish - Machining | TiN |
| Material - Machining | Carbide |
| Secondary Material Application ISO Code | K, M, S |
| Measurement System | Fractional Inch |
| Included Angle | 80 Degrees |
| Manufacturer Grade | UD51 |
| Coating Process | CVD |
| Primary Material Application | Steel |
| Secondary Material Application | Cast Iron, Nickel, Stainless Steel, Titanium |
| Clearance Angle | 7 deg |
| Cutting Application | Drilling |
| Shape | Trigon |
| Material | Carbide |
| Package Quantity | 1 |