Indexable Profiling End Mill, 3/4", PHC
| Item | Indexable Turning and Profiling Tool Holder |
|---|---|
| Overall Length | 4-1/2 in |
| Depth of Cut | 0.032 in |
| Shank Dia. | 3/4 in |
| Insert Size | 432 |
| Cutting Direction | Right Hand |
| Includes | (10) Clamping Screws, (1) Power Screw, (1) Wrench |
| Coolant Fed | Non-Coolant Through |
| Insert Shape | 55 Degrees Diamond |
| Compatible Hardware | DNMG 432, IDSN-433, PB4-CA, PB4-SS |
| ANSI Code | DDJNR 12-4B |
| Side Cutting Edge Angle | 11 deg |
| Number of Coolant Holes | 3 |
| Toolholder Style | DDJNR |
| Features | Economical 4 Corner Insert with a Chip Breaker that Enhances Cutting Performance While Maintaining Rigidity, High Feed Design Reduces Radial Cutting Forces and Tool Vibration, Small Cutting Angle Reduces Actual Chip Thickness, End Mill and Face Mill Styles |
| Insert Style | DNMG |
| Coolant Hole Shape | Round |
| Cutting Application | Turning |
| Shank Length | 2.73 in |
| Shank Width | 3/4 in |
| Insert Holding Type | Clamp |
| Side-to-Cutting Tip | 1" |
| Insert Inscribed Circle | 1/2 in |
| Shank Material | Steel |
| Insert Clearance Angle | 0 Degrees |
| Shank Height | 3/4" |
| Head Length | 1.77 in |
| Approach Angle | 93 deg |
| Rake | Negative |
| Number of Inserts | 3 |
| Max. Cutting Dia. | 3/4 in |
| Min. Cutting Dia. | 0.411 in |
| Max. Speed | 655 RPM |
| Package Quantity | 1 |