Walter Titex - Solid carbide twist drill, Extra Long Drill, 4.00mm, Carbide, DC170-12-04.000A1-WJ30EJ
| Item | Extra Long Drill Bit |
|---|---|
| Shank Type | Straight |
| Size | 4.00mm |
| Material | Solid Carbide |
| Finish | TiNAl |
| Point Angle | 140 deg |
| Shank Dia. | 6 mm |
| Cutting Direction | Right Hand |
| Flute Length | 64 mm |
| Maximum Drilling Depth | 64 mm |
| Overall Length | 102 mm |
| Number of Flutes | 2 |
| Drill Bit Point Angle | 140 Degrees |
| List Number | DC170-12 |
| Coolant Through | Yes |
| Dimension Type | Metric |
| Metric Size | 0.16mm |
| Shank Type - Machining | Straight |
| Application | For General Drilling, General Mechanical Engineering |
| Depth:Dia. Ratio | 12 xD |
| Drill Bit Dimension Type | Metric |
| Grade | WJ30EJ |
| Drill Bit Size | 4.00 mm |
| Decimal Equivalent | 0.1575 |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Material | Carbide |
| Drill Bit Finish | TiAlN+AlCrN |
| Flute Type | Spiral |
| Point Type | Split |
| Depth x Dia. Ratio | 12 xD |
| Standards | TP-NORM 65 |
| Coolant Fed | Coolant Through |
| Series | Supreme |
| Measurement System | Metric |
| Finish - Machining | TiAlN+AlCrN |
| Material Grade - Machining | WJ30EJ |
| Material - Machining | Carbide |
| Secondary Material Application ISO Code | H |
| Drill Point Length | 0.728 mm |
| Drill Diameter Tolerance | M7 |
| Primary Material Application ISO Code | P, K |
| Drill Bit Point Type | Split Point |
| Primary Material Application | Cast Iron, Steel |
| Drill Length Class | Extra Long |
| Number of Coolant Holes | 2 |
| Secondary Material Application | Hardened Steel |
| Sheeter Drill | No |
| Shank Length | 36 mm |
| Package Quantity | 1 |