Walter Titex - Solid carbide twist drill, Micro Drill, 0.50mm, Carbide, DB133-08-00.500A0-WJ30ER
| Item | Micro Drill Bit |
|---|---|
| Drill Bit Size | 0.50 mm |
| Shank Dia. | 3 mm |
| Flute Length | 7/32 in |
| Overall Length | 48 mm |
| Number of Flutes | 2 |
| Drill Bit Point Angle | 140 Degrees |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Drill Bit Material | Solid Carbide |
| Drill Bit Finish | AlCrN |
| Decimal Equivalent | 0.0197 |
| Shank Type | Straight |
| Drill Bit Dimension Type | Metric |
| Coolant Through | No |
| Grade | High Performance |
| Sizes Included | 0.0197 in |
| Number of Pieces | 1 |
| Depth x Dia. Ratio | 8 xD |
| List Number | DB133-08-A0 |
| Depth:Dia. Ratio | 8 xD |
| Point Type | Conventional |
| Coolant Fed | Non-Coolant Through |
| Finish - Machining | AlCrN |
| Material - Machining | Carbide |
| Maximum Drilling Depth | 0.236 in |
| Series | Supreme |
| Measurement System | Metric |
| Standards | TP-NORM 64M |
| Drill Length Class | Micro Length |
| Shank Length | 35 mm |
| Shank Type - Machining | Straight |
| Material Grade - Machining | High Performance |
| Secondary Material Application | Titanium, Graphite, Composite, Hardened Steel, Nickel |
| Secondary Material Application ISO Code | S, H, O |
| Primary Material Application | Aluminum, Steel, Cast Iron, Copper, Brass, Bronze |
| Drill Diameter Tolerance | M7 |
| Aircraft Drill | No |
| Drill Bit Point Type | Conventional Point |
| Circuit Board Drill | No |
| Primary Material Application ISO Code | N, P, K |
| Package Quantity | 1 |