Baldor-Reliance Motor, 10HP,1760RPM,3PH,60HZ,215TC,0748M,TEFC,FFeatures:Designed and manufactured and tested to exceed the IEEE 841-1994 standards for severe duty TEFC induction motorsPremium efficiency copper windings using Baldor-Reliance ISR (Inverter Spike Resistant)® magnet wire comply with CEE efficiency guidelinesInpro Seal® on fan and drive end shaft extensions2-part yellow epoxy oxide primer (inside & outside)Gray epoxy paint and corrosion resistant hardwareReduced noise, vibration and mechanical tolerancesFinal test and vibration results shipped with motorTypical Applications:Typical applications include petro-chemical, pulp and paper plants, mines and other installations requiring premium efficient motors manufactured and tested to rigid standards for severe duty service.
| Power | 10 hp |
|---|---|
| Rated Speed | 1,760 rpm |
| Frame Size | 215TC |
| Voltage | 575 V |
| Current | FL 9.8 A |
| Mounting Type  | Rigid |
| Motor Enclosure Type | Totally Enclosed |
| Electrical Phase | Three-Phase |
| Frequency | 60 Hz |
| weight | 231 lbs |
| opposite end bearing size | 6307 |
| dimension c | 20.06 in |
| power factor | 83 |
| kva code | H |
| drive end flange | C-Face |
| motor rpm 60 hertz | 1760 rpm |
| mounting location | Rigid |
| phase | 3 |
| grease | POLYREX EM |
| manufacturers part number | CECP83774T-5 |
| enclosure | TEFC |
| max kvar | 1.5 |
| service factor | 1.15 |
| bearing drive end | 6307 |
| brand | Baldor-Reliance |
| rpm | 1760 rpm |
| is_motor | Yes |
| insulation class | F |
| horsepower | 10 HP |
| temp code | T3 |
| frame | 215TC |
| hertz | 60 Hz |
| design code | B |
| number of rotor bars | 28 |
| enclosure type | Totally Enclosed |
| full load efficiency | 91.7 |
| full load amps | 9.8 FLA |
| number of stator slots | 36 |
| poles | 4 |
| rpm range | 1701-1800 rpm |
| ambient temperature | 40 °C |
| Unidad | piece |
| Cantidad mínima | 1 |
| Incremento de cantidad | 1 |
| Fabricante | Baldor |
| Vendor SKU | WBB388829 |
| Lead Time | Ships in 2 Business Days |