#29 2-7/8" TiN 135 Deg. Jobber Length Drill Bit
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 2-7/8 in |
| Drill Bit Point Angle | 135 Degrees |
| Drill Bit Size | #29 |
| Number of Flutes | 2 |
| Shank Dia. | 1/8 in |
| Material - Machining | High Speed Steel |
| Cutting Direction | Right Hand |
| Finish - Machining | TiN |
| Shank Type - Machining | Straight |
| Flute Length | 1-3/4 in |
| Number of Pieces | 1 |
| Decimal Equivalent | 0.136 |
| Flute Type | Parabolic |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Dimension Type | Wire |
| Application | Drilling Deep Holes |
| List Number | Westward |
| Standards | ANSI |
| Coolant Fed | Non-Coolant Through |
| Measurement System | Wire |
| Drill Bit Point Type | Split Point |
| Drill Length Class | Jobber Length |
| Material Grade - Machining | General Purpose |
| Maximum Drilling Depth | 1-5/16 in |
| Secondary Material Application ISO Code | M |
| Shank Length | 1-1/8 in |
| Spiral Direction | Right Hand |
| Secondary Material Application | Non Ferrous Material |
| Depth:Dia. Ratio | 5 xD |
| Primary Material Application ISO Code | P, K, N |
| Primary Material Application | Cast Iron, Aluminum, Steel, Non-Ferrous Material |
| Series | Westward |
| Helix Angle | 21 Degrees to 34 Degrees |
| Sheeter Drill | No |
| Aircraft Drill | No |
| Web Thinning | Thinned |
| Number of Coolant Holes | 0 |
| Drill Diameter Tolerance | +0.0000 in/-0.0007 in |
| Package Quantity | 1 |