Thread Forming Tap, 5/8"-11, Semi-Bottoming, TiCN, 5 Flutes
| Item | Thread Forming Tap |
|---|---|
| Tap Thread Size | 5/8"-11 |
| Tap Chamfer | Semi-Bottoming |
| Tap Finish | TiCN |
| Number of Flutes | 5 |
| Tap Material | High Speed Steel |
| Tap Thread Type | UNF |
| Overall Length | 4-21/64 in |
| Thread Direction | Right Hand |
| Tap Style | Thread Forming |
| Number of Pieces | 1 |
| Shank Dia. | 0.48 in |
| Tap Grouping | Tap |
| List Number | GT25 |
| Standards | DIN-ANSI |
| Pitch Diameter Limit | H7 |
| Tap Dimension Type | Inch |
| Thread Length | 51/64 in |
| Tap Size | 5/8" |
| Cutting Direction - Machining | Right Hand |
| Material Grade - Machining | WU32MG |
| Tap Shank Standard | ANSI |
| Spiral Direction | Neutral |
| Square Size | 0.357 in |
| Threads per Inch | 11 |
| Extended Neck | Yes |
| Measurement System | Decimal Inch |
| Series | GT25 |
| Primary Material Application ISO Code | P |
| Features | Form C Semi-Bottoming Entry Taper, Roll Form Taps, Through Coolant |
| Secondary Material Application | Stainless Steel |
| Thread Standard | UNC |
| 75% Thread Drill Size | 37/64 in |
| Tap Length Standard | DIN |
| Thread Limit | H7 |
| Secondary Material Application ISO Code | M |
| 65% Thread Drill Size | 14.8 mm |
| Thread Size | 5/8"-11 |
| 55% Thread Drill Size | 15 mm |
| Coolant Fed | Coolant Through |
| Primary Material Application | Steel |
| Shank Length | 2-5/16 in |
| Helix Angle | 0 Degrees |
| Package Quantity | 1 |