Spiral Flute Tap, M8-1.25, Modified Bottoming, Metric Coarse
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 90 mm |
| Tap Style | Flute |
| Shank Dia. | 8.1 mm |
| Tap Chamfer | Modified Bottoming |
| Tap Dimension Type | Metric |
| Tap Material | Vanadium High Speed Steel |
| Tap Size | M8 |
| Number of Flutes | 3 |
| Thread Length | 12 mm |
| Tap Thread Type | Metric Coarse |
| Tap Thread Size | M8-1.25 |
| Pitch Diameter Limit | D5 |
| Tap Grouping | Tap |
| Thread Direction | Right Hand |
| List Number | E5 |
| Number of Pieces | 1 |
| Tap Finish | Hard Lube |
| Standards | ANSI, DIN |
| Cutting Direction - Machining | Right Hand |
| Material | HSSE-V3 |
| Series | E5 |
| Size | M8 x 1.25, D5 |
| Material Grade - Machining | Vanadium High Speed Steel |
| Measurement System | Metric |
| Thread Size | M8x1.25 |
| Primary Material Application ISO Code | P |
| Extended Neck | Yes |
| Shank Length | 78 mm |
| Secondary Material Application | Nickel, Stainless Steel, Titanium |
| Primary Material Application | Steel |
| Tap Shank Standard | ANSI |
| Thread Standard | Metric Coarse |
| Thread Pitch | 1.25 mm |
| Spiral Direction | Right Hand |
| Secondary Material Application ISO Code | M, S |
| Drill Bit Size | 6.70mm |
| 75% Thread Drill Size | H |
| Shank Type - Machining | Straight |
| 65% Thread Drill Size | I |
| Thread Limit | D5 |
| Tap Length Standard | DIN |
| 55% Thread Drill Size | 7.1 mm |
| System of Measurement | Inch |
| Blank Standard | 302A |
| Finish | Hardslick |
| Weight | 0.072 |
| Chamfer Length | 2P-3P |
| Pitch | 1.25 |
| Chamfer Type | Modified Bottoming |
| Package Quantity | 1 |