O-Ring, Dash 006, Viton ETP, 0.07 In., PK5
| Dash Number | 006 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton ETP |
| O-Ring Material Compatibility | Detergents, Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Methanol, Toluene, Propane Gas, Acids, Sulfuric, Steam, Carbon Dioxide, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Bleach, Animal Fats, Liquid |
| Durometer | 75A |
| Color | Black |
| Nominal Inside Dia. | 1/8 in |
| Actual Inside Dia. | 0.114 in |
| Nominal Outside Dia. | 1/4 in |
| Actual Width | 0.07 in |
| Temp. Range | -10 Degrees to 400 Degrees F |
| Actual Outside Dia. | 0.254 in |
| Metal Detectable | No |
| Item | O-Ring |
| X-Ray Detectable | No |
| X-Ray Dectectable | No |
| Durometer (Hardness) Rating | Medium Hard |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Nominal Width | 1/16 in |
| FDA Approved | Yes |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Operating Temperature - Minimum | -10 deg F |
| Cross-Section Width | 1/16 in |
| Inside Diameter - Nominal | 1/8 in |
| Standards | ASTM D2000, SAE J200 |
| Outside Diameter - Nominal | 1/4 in |
| Outside Diameter - Actual | 0.254 in |
| Operating Temperature - Maximum | 400 deg F |
| Inside Diameter - Actual | 0.114 in |
| Width - Actual | 0.07 in |
| Country of Origin (subject to change) | Taiwan, Province of China |
| Package Quantity | 5 |