O-Ring, Dash 214, FEP w/Sil Core, 0.13 In.
| Dash Number | 214 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | FEP with Silicone Core |
| O-Ring Material Compatibility | Detergents, Water, Carbon Dioxide, Nitrogen, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Kerosene, Lubricating Oils, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 85A |
| Color | Clear with Red Core |
| Nominal Inside Dia. | 1 in |
| Actual Inside Dia. | 0.984 in |
| Nominal Outside Dia. | 1-1/4 in |
| FDA Approved | Yes |
| Durometer (Hardness) Rating | Hard |
| Item | O-Ring |
| Temp. Range | -75 Degrees to 400 Degrees F |
| Actual Outside Dia. | 1.262 in |
| Meets/Exceeds | ASTM D2116 |
| Actual Width | 0.139 in |
| Metal Detectable | No |
| X-Ray Detectable | No |
| X-Ray Dectectable | No |
| Nominal Width | 1/8 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | FEP Core |
| Width - Actual | 0.139 in |
| Inside Diameter - Nominal | 1 in |
| Standards | ASTM D2116 |
| Outside Diameter - Nominal | 1-1/4 in |
| Operating Temperature - Minimum | -75 deg F |
| Inside Diameter - Actual | 0.984 in |
| Cross-Section Width | 1/8 in |
| Operating Temperature - Maximum | 400 deg F |
| Outside Diameter - Actual | 1.262 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |