O-Ring, Dash 214, Viton ETP, 0.13 In.
| Dash Number | 214 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton ETP |
| O-Ring Material Compatibility | Detergents, Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Methanol, Toluene, Propane Gas, Acids, Sulfuric, Steam, Carbon Dioxide, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Bleach, Animal Fats, Liquid |
| Durometer | 75A |
| Color | Black |
| Nominal Inside Dia. | 1 in |
| Actual Inside Dia. | 0.984 in |
| Nominal Outside Dia. | 1-1/4 in |
| Metal Detectable | No |
| Actual Width | 0.139 in |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Temp. Range | -10 Degrees to 400 Degrees F |
| Item | O-Ring |
| X-Ray Detectable | No |
| Actual Outside Dia. | 1.262 in |
| Nominal Width | 1/8 in |
| X-Ray Dectectable | No |
| FDA Approved | Yes |
| Durometer (Hardness) Rating | Medium Hard |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Width - Actual | 0.139 in |
| Outside Diameter - Actual | 1.262 in |
| Inside Diameter - Actual | 0.984 in |
| Outside Diameter - Nominal | 1-1/4 in |
| Operating Temperature - Minimum | -10 deg F |
| Standards | ASTM D2000, SAE J200 |
| Cross-Section Width | 1/8 in |
| Operating Temperature - Maximum | 400 deg F |
| Inside Diameter - Nominal | 1 in |
| Country of Origin (subject to change) | Taiwan, Province of China |
| Package Quantity | 1 |