O-Ring, Dash 225, Viton, 0.13 In., PK10
| Dash Number | 225 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | Viton |
| O-Ring Material Compatibility | Detergents, Water, Nitrogen, Silicone Grease, Mineral Oil, Vegetable Oils, Natural Gas, Lubricating Oils, Sulfuric Acid, Toluene, Propane Gas, Carbon Dioxide, Hydraulic Oils, Fatty Acids, Gasoline, Kerosene, Diesel Oil, Hydrochloric Acid, Bleach, Animal Fats, Liquid |
| Durometer | 75A |
| Color | Black |
| Nominal Inside Dia. | 1-7/8 in |
| Actual Inside Dia. | 1.859 in |
| Nominal Outside Dia. | 2-1/8 in |
| X-Ray Detectable | No |
| Actual Width | 0.139 in |
| FDA Approved | No |
| Item | O-Ring |
| X-Ray Dectectable | No |
| Nominal Width | 1/8 in |
| Meets/Exceeds | ASTM D2000, SAE J200 |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Durometer (Hardness) Rating | Medium Hard |
| Metal Detectable | No |
| Actual Outside Dia. | 2.137 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | Viton |
| Outside Diameter - Actual | 2.137 in |
| Operating Temperature - Minimum | -15 deg F |
| Inside Diameter - Nominal | 1-7/8 in |
| Operating Temperature - Maximum | 450 deg F |
| Cross-Section Width | 1/8 in |
| Standards | ASTM D2000, SAE J200 |
| Width - Actual | 0.139 in |
| Application | Standard |
| Outside Diameter - Nominal | 2-1/8 in |
| Inside Diameter - Actual | 1.859 in |
| Country of Origin (subject to change) | Taiwan, Province of China |
| Package Quantity | 10 |