O-Ring, Dash 230, FEP, Viton Core, 0.13 In.
| Dash Number | 230 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | FEP with Viton Core |
| O-Ring Material Compatibility | Detergents, Water, Carbon Dioxide, Nitrogen, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Kerosene, Lubricating Oils, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 90A |
| Color | Clear with Black Core |
| Nominal Inside Dia. | 2-1/2 in |
| Actual Inside Dia. | 2.484 in |
| Nominal Outside Dia. | 2-3/4 in |
| Item | O-Ring |
| Temp. Range | -15 Degrees to 400 Degrees F |
| Durometer (Hardness) Rating | Very Hard |
| Actual Width | 0.139 in |
| Nominal Width | 1/8 in |
| Meets/Exceeds | ASTM D2116 |
| X-Ray Detectable | No |
| FDA Approved | Yes |
| Metal Detectable | No |
| X-Ray Dectectable | No |
| Actual Outside Dia. | 2.762 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | FEP Core |
| Width - Actual | 0.139 in |
| Inside Diameter - Nominal | 2-1/2 in |
| Operating Temperature - Maximum | 400 deg F |
| Cross-Section Width | 1/8 in |
| Standards | ASTM D2116 |
| Operating Temperature - Minimum | -15 deg F |
| Outside Diameter - Actual | 2.762 in |
| Inside Diameter - Actual | 2.484 in |
| Outside Diameter - Nominal | 2-3/4 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |