O-Ring, Dash 330, FEP, Viton Core, 0.21 In.
| Dash Number | 330 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | FEP with Viton Core |
| O-Ring Material Compatibility | Detergents, Water, Carbon Dioxide, Nitrogen, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Kerosene, Lubricating Oils, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 90A |
| Color | Clear with Black Core |
| Nominal Inside Dia. | 2-1/8 in |
| Actual Inside Dia. | 2.1 in |
| Nominal Outside Dia. | 2-1/2 in |
| Durometer (Hardness) Rating | Very Hard |
| X-Ray Detectable | No |
| Meets/Exceeds | ASTM D2116 |
| Temp. Range | -15 Degrees to 400 Degrees F |
| FDA Approved | Yes |
| Metal Detectable | No |
| Actual Width | 0.21 in |
| Nominal Width | 3/16 in |
| Item | O-Ring |
| X-Ray Dectectable | No |
| Actual Outside Dia. | 2.52 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | FEP Core |
| Inside Diameter - Nominal | 2-1/8 in |
| Cross-Section Width | 3/16 in |
| Width - Actual | 0.21 in |
| Operating Temperature - Minimum | -15 deg F |
| Standards | ASTM D2116 |
| Operating Temperature - Maximum | 400 deg F |
| Outside Diameter - Nominal | 2-1/2 in |
| Inside Diameter - Actual | 2.1 in |
| Outside Diameter - Actual | 2.52 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |