O-Ring, Dash 333, FEP w/Sil Core, 0.21 In.
| Dash Number | 333 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Round |
| Cross-Section Shape | Round |
| O-Ring Material | FEP with Silicone Core |
| O-Ring Material Compatibility | Detergents, Water, Carbon Dioxide, Nitrogen, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Kerosene, Lubricating Oils, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 85A |
| Color | Clear with Red Core |
| Nominal Inside Dia. | 2-1/2 in |
| Actual Inside Dia. | 2.475 in |
| Nominal Outside Dia. | 2-7/8 in |
| Actual Outside Dia. | 2.895 in |
| X-Ray Dectectable | No |
| Actual Width | 0.21 in |
| Metal Detectable | No |
| X-Ray Detectable | No |
| Temp. Range | -75 Degrees to 400 Degrees F |
| Durometer (Hardness) Rating | Hard |
| Item | O-Ring |
| Meets/Exceeds | ASTM D2116 |
| FDA Approved | Yes |
| Nominal Width | 3/16 in |
| Type | O-Ring |
| Product Type | O-Ring |
| Material | FEP Core |
| Outside Diameter - Nominal | 2-7/8 in |
| Standards | ASTM D2116 |
| Cross-Section Width | 3/16 in |
| Operating Temperature - Minimum | -75 deg F |
| Operating Temperature - Maximum | 400 deg F |
| Inside Diameter - Actual | 2.475 in |
| Inside Diameter - Nominal | 2-1/2 in |
| Width - Actual | 0.21 in |
| Outside Diameter - Actual | 2.895 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |