Straight Flute Drill, Size 3/4, TiAlN
| Item | Straight Flute Drill Bit |
|---|---|
| Overall Length | 4 in |
| Drill Bit Size | 3/4 in |
| Drill Bit Point Angle | 140 deg |
| Flute Length | 1-1/2 in |
| Number of Flutes | 2 |
| Decimal Equivalent | 0.75 |
| Drill Bit Material | Solid Carbide |
| Drill Bit Finish | TiAlN |
| List Number | 470 |
| Material | Carbide |
| Drill Bit Grouping | Drill Bit |
| Depth:Dia. Ratio | 2 xD |
| Finish | TiAlN |
| Shank Dia. | 3/4 in |
| Drill Point (Deg.) | 140 Degrees |
| Grade | General Purpose |
| Application | Metalworking |
| Point Type | Notched |
| Fractional Size (In.) | 3/4 |
| Type | Straight Flute |
| Drill Bit Dimension Type | Fractional Inch |
| Number of Pieces | 1 |
| Material - Machining | Carbide |
| Drill Diameter Tolerance | +0.0000 in /-0.0005 in |
| Maximum Drilling Depth | 1-1/2 in |
| Primary Material Application ISO Code | K, P, H, M, S |
| Flute Type | Straight |
| Web Thinning | Thinned |
| Coolant Fed | Coolant Through |
| Primary Material Application | All Materials |
| Drill Bit Point Type | Notched Point |
| Finish - Machining | AlTiN |
| Drill Length Class | Jobber Length |
| Web Construction | Tapered |
| Shank Type - Machining | Straight |
| Aircraft Drill | No |
| Cutting Direction | Right Hand |
| Shank Length | 2-1/2 in |
| Measurement System | Fractional Inch |
| Material Grade - Machining | C2 |
| Helix Angle | 0 Degrees |
| Standards | Not Rated |
| Package Quantity | 1 |