| Item | Hand Pump |
|---|---|
| Action Type | Piston |
| For Container Size | 55 gal |
| Max. Flow Rate | 15 oz per stroke |
| Max. Viscosity | 8,800 cps |
| Diesel Exhaust Fluid Compatible | Yes |
| Wetted Materials | Polyethylene, Polypropylene |
| Includes Suction Tube | Yes |
| Metered | No |
| Food Grade | Yes |
| Nozzle Material | Not Applicable |
| Runs Dry | Yes |
| Seal Material | Polyethylene |
| Piston Material | Polyethylene |
| Max. Fluid Temp. | 130 deg F |
| Self-Priming | Yes |
| Max. Head - Pumps | 6 ft |
| Includes Nozzle | No |
| Nozzle Operation | Not Applicable |
| Includes Bung Adapter | Yes |
| Power Source | Manual |
| Max. Head Pressure | 3 psi |
| Max. Oil Flow | 16 oz per stoke |
| Min. Operating Temp. | 35 deg F |
| Includes Spout | Yes |
| Max. Outlet Pressure | 3 psi |
| Static Protection | Not Groundable |
| Not Recommended Chemicals | Ammonia Liquid, Bleach, Brake Fluid, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Concentrated Nitric Acid, Cyclohexane, E85, Gasoline, Grease, Heptane, Hexane, Petroleum Oil, Synthetic Oil, Hydrazine, Hydrochloric Acid 100%, Hydrofluoric Acid 100%, Hydrofluoric Acid 75%, Kerosene, Lacquer Thinners, Lithium Grease, Methyl Chloride, Methyl Ethyl Ketone, Nitric Acid 10% Solution, Nitric Acid 20% Solution, Paint Thinner, Stoddard Solvent, Sulfuric Acid 10% to 75%, Sulfuric Acid 75% to 100%, Sulfuric Acid up to 10%, Toluene, Trichlorethylene 50%, Turpentine, Xylene |
| Maximum Viscosity | 8,800 cps |
| Meter Type Included | No Meter Included |
| Chemical Compatibility | Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonium Hydroxide, Anhydrous Ammonia, Antifreeze Coolant, Calcium Chloride, Citric Acid 50%, DEF, Deionized Water, Diesel Fuel, Ethanol, Ethyl Acetate, Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Formic Acid, Fresh Water, Glycerin, Hydrochloric Acid 20%, Hydrochloric Acid 37%, Hydrofluoric Acid 20%, Isopropanol, Methanol, Motor Oil, Naphtha, Nitric Acid 50% Solution, Paint, Pesticides, Phosphoric Acid 40% Solution, Potassium Hydroxide 50%, Salt Water, Sodium Bicarbonate 10%, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Windshield Washer Fluid |
| Spout Material | Polypropylene |
| Mount Type | Bung |
| Adapter Material | Polyethylene |
| Maximum Oil Flow | 16 oz per stoke |
| Maximum Outlet Pressure | 3 psi |
| Discharge Connection Type | Tube |
| Standards | FDA Compliant |
| Hose Inside Diameter | 3/4 in |
| Suction Tube Length - Minimum | Not Applicable |
| Adapter Connection Diameter | 2 in |
| Includes | Safety Strap |
| Wetted Material | Polyethylene, Polypropylene |
| Container Cover Type Included | No Cover Included |
| For Container Type | Drum |
| Includes Discharge Hose | Yes |
| Container Size Included | Not Applicable |
| Suction Tube Material | Polypropylene |
| Hose Tube Material | PVC |
| Suction Tube OD | 1-11/16 in |
| Pump Technology | Piston |
| Suction Tube Length - Maximum | 38 in |
| Spout Length | 6-1/2 in |
| Maximum Fluid Temperature | 130 deg F |
| Minimum Operating Temperature | 35 deg F |
| Hose Outside Diameter | 7/8 in |
| Compatible NLGI Viscosity Grade | Not Applicable |
| Housing Material | Polyethylene/Polypropylene |
| Includes Follower Plate | No Follower Plate Included |
| Suction Tube ID | 1-1/2 in |
| Hose Cover Material | PVC |
| Maximum Flow Rate | 15 oz per stroke |
| Maximum Head | 3 ft |
| Container Type Included | Not Applicable |
| Spout Connection Size | Not Applicable |
| Maximum Head Pressure | 3 psi |
| Discharge Tube Outlet ID | 11/16 in |
| Housing Finish | Not Applicable |
| Adapter Connection Standard | MNPT |
| Hose Length | 2 ft 9 in |
| Discharge Tube Outlet OD | 15/16 in |
| Duty Cycle | Continuous |
| Power Source - TS Only | Manual |
| Power Source - old | Manual |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |