Centrifugal Pump, Phase Single, Pump Housing Material Stainless Steel, Horsepower 1 hp, Nameplate Voltage 115/230V AC, Flow Rate @ 40 ft of Head (Maximum) 53 gpm, Flow Rate @ 60 ft of Head (Maximum) 14 gpm, Flow Rate @ 80 ft of Head (Maximum) Not Applicable, Maximum Feet of Head 64 ft, Compatible Intake Pipe Size 1 1/2 in, Intake Type Barbed, Compatible Discharge Pipe Size 1 1/2 in, Discharge Type Barbed, Motor Enclosure Totally Enclosed Fan Cooled
| Discharge Pump Type | Centrifugal Pump |
|---|---|
| HP - Pumps | 1 HP |
| Phase - Pumps | 1 |
| Voltage - Pumps | 115V AC, 230V AC |
| Max. Pressure - Pumps | 64 ft of head |
| Housing Material - Pumps | 304 Stainless Steel |
| Inlet Size - Pumps | 1.5 in barb |
| Outlet Size - Pumps | 1.5 in barb |
| Motor Enclosure - Pumps | Totally Enclosed Fan-Cooled |
| Best Efficiency Range GPM @ Head | 30 to 50 gpm |
| Max. Head | 64 ft |
| Thermal Protection | No |
| Max. Liquid Temp. | 225 deg F |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Cord Type | Amphenol Plug |
| Hz | 60 |
| Bearing Type | Sealed Ball |
| Agency Compliance | UL |
| Cord Length | 1 ft |
| Diameter | 6-3/4 in |
| Phase | Single |
| Frame | 56J |
| Width | 6-3/4 in |
| Motor Ambient Temp. Rating | 40 Degrees C |
| Impeller Material | Stainless Steel |
| Amps | 9.6/4.8 |
| Motor Type | Split Capacitor Start |
| Best Efficiency GPM @ PSI | 37 |
| Overload Protection | Auto |
| Inlet Pressure | 10 psi |
| Item | Centrifugal Pump |
| Motor RPM | 3,420 rpm |
| Wetted Materials | Stainless Steel |
| Installation Position | Horizontal |
| Seal Material | Buna-N, Carbon, Ceramic |
| Impeller Type | Semi-Open |
| Duty | Continuous |
| Port Rotation | Top |
| Length | 10.8 in |
| Max. Case Pressure | 50 psi |
| Max. Dia. Solids | 0.27 in |
| Height | 7.63 in |
| Manufacturers Warranty Length | 1 yr |
| GPM of Water @ 40 Ft. of Head | 53 g/min |
| Max. Specific Gravity | 1 |
| GPM of Water @ 50 Ft. of Head | 35 g/min |
| GPM of Water @ 60 Ft. of Head | 14 g/min |
| Series | FDP |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Specific Gravity (Maximum) | 1 |
| Discharge Type | Barbed |
| Motor Ambient Temperature (Maximum) | 104 Degrees F |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| NPSHr | 23.1 ft |
| Flow Rate @ 30 ft of Head (Maximum) | Not Applicable |
| Pump Housing Material | Stainless Steel |
| Overall Width | 6.7 in |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Compatible Intake Pipe Size | 1-1/2 in |
| Impeller Design | Semi-Open |
| Flow Rate @ 60 ft of Head (Maximum) | 14 gpm |
| Suction Lift (Maximum) | 24 ft |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Maximum Media Temperature | 225 deg F |
| Wetted Material | Stainless Steel |
| Electrical Connection Type | Plug-In |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Mounting Orientation | Horizontal |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Motor Frame Designation | 56J |
| Nameplate Voltage | 115/230V AC |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 40 ft of Head (Maximum) | 53 gpm |
| Flow Rate @ 50 ft of Head (Maximum) | 35 gpm |
| Standards | UL Listed |
| Priming | Manual |
| Horsepower | 1 |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Solid Diameter (Maximum) | 0.27 in |
| Intake Type | Barbed |
| For Use With Potable Systems | Yes |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Overall Height | 7.6 in |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Frequency | 60 Hz |
| Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
| Maximum RPM | 3,500 rpm |
| Flow Rate @ 10 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Best Efficiency Flow | 37 gpm |
| Best Efficiency Head | 62 ft |
| Flow Rate @ 20 ft of Head (Maximum) | Not Applicable |
| Compatible Discharge Pipe Size | 1-1/2 in |
| Thermal Overload Protection | No |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Duty Cycle | Continuous |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
| Overall Length | 10.8 in |
| Maximum Feet of Head | 64 ft |
| Shut Off Pressure - Maximum | 50 psia |
| Media Temperature - Maximum | 225 deg F |
| Suction Lift - Maximum | 24 ft |
| Flow Rate @ 10 ft of Head - Maximum | Not Applicable |
| Full Load Current | 9.6/4.8 |
| Shaft Seal Type | Mechanical |
| Inlet Diameter | 1-1/2 in |
| Number of Stages | 1 |
| Motor Frame Size | 56J |
| Discharge Rotation Increments | 90 deg |
| Drive Coupling Type | No Coupling |
| Inlet Position | Offset |
| Motor Speed - Maximum | 3,500 rpm |
| Discharge Diameter | 1-1/2 in |
| Shaft Material | 300 Stainless Steel |
| Discharge Standard | Barbed |
| Inlet Standard | Barbed |
| Case Pressure - Maximum | 50 psia |
| Media Temperature - Minimum | -40 deg F |
| Ambient Temperature - Maximum | 104 deg F |
| Flow Rate (Maximum) | 53 gpm |
| Chemical Compatibility | Ammonium Hydroxide, Antifreeze, Benzoic Acid, Boric Acid 10%, Citric Acid, Detergents, Diesel, Diethylene Glycol, Gasoline, Glycerol, Hydraulic Fluid, Kerosene, Lactic Acid, Motor Oil, Potassium Hydroxide, Potassium Hydroxide 50%, Potassium Permanganate 20%, Propylene Glycol, Saltwater, Sodium Hydroxide 10%, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Water, Water-Glycol |
| Shaft Outer Diameter | 5/8 in |
| Shaft Seal Material | Carbon, Buna N, Ceramic |
| Impeller Diameter | 4-3/8 in |
| Discharge Orientation | Top |
| Pumping Application | Boiler Feed, Booster Services, Condensate Removal, Condensate Return, Coolant Recirculating, Cooling and Heat Transfer, Evaporative Cooling, Filtration, Jockey Pump Services, Liquid Transfer, Reverse Osmosis and Water Treatment, Spraying Systems, Water Circulation |
| Feet of Head (Maximum) | 65 ft |
| Discharge Position | Offset |
| Volute Material | Stainless Steel |
| Pump Design | End Suction |
| Inlet Orientation | Top |
| Wire Rope Length | 10.8 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |