Hydronic Circulating Pump, Compatible Intake Pipe Size 1 1/2 in, Connection Type Flange, Face to Face Dimension 6 1/2 in, Flange or Union Included No, For Use With Potable Systems No, Horsepower 1/6 hp, Maximum Feet of Head 20 ft, Maximum Flow Rate @ 10 Feet of Head 23 gpm, Maximum Flow Rate @ 15 Feet of Head 18 gpm, Maximum Flow Rate @ 1 Foot of Head 37 gpm, Nameplate Voltage 120V AC, Number of Speeds Variable, Phase Single, Pump Type Energy Efficient, Series Family Compass R
| Item | Hydronic Circulating Pump |
|---|---|
| Voltage | 115V AC |
| Phase | Single |
| Horsepower | 0.1667 |
| Series | Compass R2035DI-8.5X2 |
| Pump Type | Energy Efficient |
| Number of Speeds | Variable |
| Maximum Feet of Head | 20 ft |
| Connection Type | Flange |
| Face to Face Dimension | 6-1/2 in |
| Impeller Material | Plastic |
| Standards | CSA Certified, ETL |
| Includes | Thermal Overload Protection |
| Amps | 4.4 A |
| Flange or Union Included | No |
| Maximum Operating Pressure | 175 psi |
| Wetted Material | Ductile Iron |
| Maximum Flow Rate @ 15 Feet of Head | 18 gpm |
| Body Gasket Material | EPDM |
| Maximum RPM | 2,000 rpm |
| Compatible Intake Pipe Size | 1-1/2 in |
| For Use With Potable Systems | No |
| Overall Length | 11.46 in |
| Maximum Flow Rate @ 10 Feet of Head | 23 gpm |
| Electrical Connection Type | Hardwired |
| Series Family | Compass R |
| Maximum Flow Rate @ 50 Feet of Head | [DELETE] |
| Nameplate Voltage | 120V AC |
| Pump Housing Material | Ductile Iron |
| Overall Height | 6-1/2 in |
| Maximum Flow Rate @ 1 Feet of Head | 37 gpm |
| Compatible Media Type | Water, 30% Glycol |
| Compatible Discharge Pipe Size | 1-1/2 in |
| Minimum Media Temperature | -4 deg F |
| Pump Mounting Position | Horizontal |
| Manufacturer Warranty Length | 2.5 yr |
| Maximum Flow Rate @ 20 Feet of Head | 0 gpm |
| Motor Enclosure Design | Open Drip Proof |
| Maximum Media Temperature | 230 deg F |
| Overall Width | 6.38 in |
| Number of Intakes | 2 |
| Rotor Type | Dry |
| Frequency | 60 Hz |
| Maximum Flow Rate @ 5 Feet of Head | 25 gpm |
| Number of Flange Mounting Holes | 2 |
| Pump Casing Material | Ductile Iron |
| For Low Lead Compliance Level | EX |
| Full Load Current | 4.4 A |
| Media Temperature - Minimum | -4 deg F |
| Mounting Orientation | Horizontal |
| Includes Volute | Volute Included |
| Feet of Head - Maximum | 20 ft |
| Includes Union | No Union Included |
| Operating Pressure - Maximum | 175 psi |
| Connection Standard | Flange |
| Includes Flange | No Flange Included |
| Revolutions Per Minute - Maximum | 2,000 rpm |
| Media Temperature - Maximum | 230 deg F |
| For Discharge Pipe Diameter | 1-1/2 in |
| For Inlet Pipe Diameter | 1-1/2 in |
| Flow Rate - Maximum | 35 gpm |
| Wire Rope Length | 11.46 in |
| Length | 11.46 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |