Hydronic Circulating Pump, Compatible Intake Pipe Size 2 in, Connection Type Flange, Face to Face Dimension 8 1/2 in, Flange or Union Included Yes, For Use With Potable Systems No, Horsepower 2/5 hp, Maximum Feet of Head 22 ft, Nameplate Voltage 240V AC, Number of Speeds 1, Phase Single, Pump Type In Line Centrifugal, Series Family E.2, Series E30.2-2, Amps 2.40, Compatible Discharge Pipe Size 2 in, Compatible Media Type Water
| Item | Hydronic Circulating Pump |
|---|---|
| Voltage | 240V AC |
| Phase | Single |
| Horsepower | 0.4 |
| Inlet/Outlet Size | 2 in |
| Series | E30.2-2 |
| Pump Type | In Line Centrifugal |
| Number of Speeds | 1 |
| Max. GPM @ Head | 112 gpm @ 5 ft |
| Maximum Feet of Head | 22 ft |
| Min. GPM @ Head | 0 gpm @ 22 ft |
| Connection Type | Flange |
| Best Efficiency GPM @ Head | 60 gpm @ 17 ft |
| Amps | 2.40 |
| Features | Ball Bearing, In Line, Mechanical Seal |
| Shaft Material | Stainless Steel |
| Loop Configuration | Closed |
| Thermal Protection | Yes |
| Shut-Off | 22 ft |
| Standards | UL Listed |
| Pump Mount | In Line |
| Includes | (2) Gaskets, Nuts and Bolts |
| Face to Face Dimension | 8-1/2 in |
| Impeller Material | 30% Glass-Filled Noryl(R) |
| Mechanical Seal | Silicon Carbide Enviroseal Coupled with Viton Elastomer |
| Drive Type | Direct |
| Compliance | cUL |
| Overall Length | 10.9 in |
| Overall Height | 8-1/2 in |
| Overall Width | 5.2 in |
| Compatible Intake Pipe Size | 2 in |
| Number of Intakes | 4 |
| Pump Housing Material | Cast Iron |
| Compatible Media Type | Water |
| Manufacturer Warranty Length | 3 yr |
| Series Family | E.2 |
| Maximum Media Temperature | 230 deg F |
| Maximum Operating Pressure | 150 psi |
| Nameplate Voltage | 240V AC |
| Flange or Union Included | Yes |
| For Use With Potable Systems | No |
| Compatible Discharge Pipe Size | 2 in |
| Minimum Media Temperature | 32 deg F |
| Number of Flange Mounting Holes | 4 |
| Maximum RPM | 3,350 rpm |
| Includes Flange | Flange Included |
| Media Temperature - Maximum | 230 deg F |
| Feet of Head - Maximum | 22 ft |
| Connection Standard | Flange |
| Media Temperature - Minimum | 32 deg F |
| Flow Rate - Maximum | 128 gpm |
| Motor Enclosure Design | Open Drip Proof |
| Operating Pressure - Maximum | 150 psi |
| For Low Lead Compliance Level | CE |
| Pump Casing Material | Cast Iron |
| For Inlet Pipe Diameter | 2 in |
| Includes Volute | No Volute Included |
| For Discharge Pipe Diameter | 2 in |
| Includes Union | No Union Included |
| Wire Rope Length | 10.9 in |
| Length | 10.9 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |