Diaphragm Pump, Air Intake Connection Size 1/2 in, Air Intake Connection Type NPT, Check Seat Material 316 Stainless Steel, Diaphragm Material Santoprene, Feet of Head (Maximum) 19 ft, Flow Rate (Maximum) 90 gpm, Manifold Connection Single Port, Media Discharge Connection Size 1 1/2 in, Media Discharge Connection Type NPTF, Media Intake Connection Size 1 1/2 in, Media Intake Connection Type NPTF, Operating Pressure (Maximum) 120 psi, Priming Self-Priming, Pump Assembly Type Bolt
| Item | Diaphragm Pump |
|---|---|
| Housing Material - Pumps | Cast Iron |
| Pump Assembly Type | Bolt |
| Manifold Connection | Single Port |
| Valve Material | Santoprene |
| Valve Type | Ball |
| Air Intake Connection Size | 1/2 in |
| Air Intake Connection Type | NPT |
| Check Seat Material | 316 Stainless Steel |
| Diaphragm Material | Santoprene |
| Operating Pressure (Maximum) | 120 psi |
| Standards | ATEX Certified |
| Pump Operation Type | Air |
| Overall Height | 18.4 in |
| Overall Width | 14-1/2 in |
| Overall Length | 13.3 in |
| Solid Diameter (Maximum) | 1/4 in |
| For Use With Potable Systems | No |
| Media Discharge Connection Size | 1-1/2 in |
| Feet of Head (Maximum) | 275 ft |
| Air Intake Pressure (Maximum) | 120 psig |
| Priming | Self-Priming |
| Media Intake Connection Type | NPT |
| Media Discharge Connection Type | NPT |
| Flow Rate @ 120 psi | 90 gpm |
| Media Intake Connection Size | 1-1/2 in |
| Flow Rate (Maximum) | 90 gpm |
| Series Family | 6661 |
| Series | PRO |
| Manifold Connection Standard | NPT |
| Media Discharge Location | Top |
| Media Discharge Port Configuration | Center Horizontal |
| Includes Clean In Place Technology | Not Applicable |
| Wetted Body Material | Stainless Steel |
| Includes Solenoid | No Solenoid Included |
| Food Compatibility | Not Applicable |
| Center Section Material | Cast Iron |
| Fluid Chamber Assembly Type | Bolted |
| Material Conductivity | Conductive |
| Media Temperature (Maximum) | 212 deg F |
| Manufacturers Warranty Length | 5 yr |
| Surface Roughness | Not Applicable |
| Diaphragm Reinforcement | Fabric Reinforced |
| Includes | Not Applicable |
| Manifold Port Connection Type | Single Port |
| Media Intake Location | Bottom |
| Solenoid Voltage | Not Applicable |
| Diaphragm Backing Material | Not Applicable |
| Diaphragm Base Material | Santoprene |
| Mounting Hardware Material | Stainless Steel |
| Air Consumption (Maximum) | 100 scfm |
| Displacement Per Stroke | 0.32 gal |
| Media Intake Port Configuration | Center Horizontal |
| Viscosity (Maximum) | 40,000 cps |
| Wire Rope Length | 13.3 in |
| Length | 13.3 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |