| Item | Diaphragm Pump |
|---|---|
| Pump Assembly Type | Bolt |
| Manifold Connection | Single Port |
| Valve Material | Santoprene |
| Valve Type | Ball |
| Air Intake Connection Size | 1/4 in |
| Air Intake Connection Type | NPT |
| Check Seat Material | Polypropylene |
| Diaphragm Material | Santoprene |
| Media Temperature (Maximum) | 225 deg F |
| Operating Pressure (Maximum) | 100 psi |
| Pump Operation Type | Air |
| Includes | Not Applicable |
| Standards | ANSI S1.13-1971, CAGI-PNEUROP S5.1 |
| Overall Height | 10.9 in |
| Overall Width | 8.7 in |
| Overall Length | 10 in |
| Media Intake Location | Bottom |
| Media Discharge Location | Top |
| Mounting Hardware Material | Stainless Steel |
| Media Discharge Connection Size | 1/2 in |
| Series | PX05P |
| Media Discharge Connection Type | NPT |
| Solid Diameter (Maximum) | 0.09 in |
| Flow Rate (Maximum) | 14.4 gpm |
| Media Intake Connection Size | 1/2 in |
| Media Intake Connection Type | NPT |
| Air Intake Pressure (Maximum) | 100 psi |
| Priming | Self-Priming |
| Wetted Housing Material | Polypropylene |
| Flow Rate @ 100 psi | 14.4 gpm |
| Phase | Not Applicable |
| Manifold Port Connection Type | Single Port |
| Center Section Material | Polypropylene |
| Solenoid Voltage | Not Applicable |
| Wetted Body Material | Polypropylene |
| Diaphragm Backing Material | Not Applicable |
| Diaphragm Base Material | Santoprene |
| Material Conductivity | Non-Conductive |
| Fluid Chamber Assembly Type | Bolted |
| Includes Clean In Place Technology | Not Applicable |
| Includes Solenoid | No Solenoid Included |
| Food Compatibility | Not Applicable |
| Diaphragm Reinforcement | Fabric Reinforced |
| Wire Rope Length | 10 in |
| Length | 10 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |