Circulating Pump, Compatible Intake Pipe Size 3 in, Connection Type Flange, Face to Face Dimension 12 in, Flange or Union Included Yes, For Use With Potable Systems Yes, Horsepower 1/2 hp, Maximum Feet of Head 23 ft, Maximum Flow Rate @ 10 Feet of Head 105 gpm, Maximum Flow Rate @ 15 Feet of Head 80 gpm, Nameplate Voltage 115V AC, Number of Speeds 1, Phase Single, Pump Type 3-Piece, Series Family Series PD, Maximum Flow Rate @ 20 Feet of Head 42 gpm, Series PDB-35S, Amps 2.6/5.2 A
| Item | Circulating Pump |
|---|---|
| Voltage | 115V AC |
| Phase | Single |
| Horsepower | 0.5 |
| Series | PDB-35S |
| Inlet/Outlet Size | 3 in |
| Pump Type | 3-Piece |
| Number of Speeds | 1 |
| Max. GPM @ Head | 115 gpm @ 8 ft |
| Maximum Feet of Head | 23 ft |
| Min. GPM @ Head | 42 gpm @ 20 ft |
| Connection Type | Flange |
| Shut-Off | 23 ft |
| Loop Configuration | Open |
| Impeller Material | Steel |
| Shaft Material | Carbon/Ceramic |
| Drive Type | Direct |
| Pump Mount | Bronze |
| Mechanical Seal | Bell and Gossett Motor |
| Amps | 2.6/5.2 A |
| Thermal Protection | Yes |
| Best Efficiency GPM @ Head | 80 gpm @ 15 ft |
| Face to Face Dimension | 12 in |
| Overall Width | 12 in |
| Overall Length | 20-1/4 in |
| Series Family | Series PD |
| Compatible Intake Pipe Size | 3 in |
| Pump Housing Material | Bronze |
| Maximum Flow Rate @ 1 Feet of Head | 80 gpm |
| Frequency | 60 Hz |
| Compatible Discharge Pipe Size | 3 in |
| Manufacturer Warranty Length | 1 yr |
| Flange or Union Included | Yes |
| Maximum Flow Rate @ 20 Feet of Head | 42 gpm |
| Maximum Operating Pressure | 125 psi |
| Compatible Media Type | Water |
| Maximum Flow Rate @ 15 Feet of Head | 80 gpm |
| Nameplate Voltage | 115V AC |
| Maximum Media Temperature | 225 deg F |
| Maximum RPM | 1,750 rpm |
| For Use With Potable Systems | Yes |
| Maximum Flow Rate @ 10 Feet of Head | 105 gpm |
| Operating Pressure - Maximum | 125 psi |
| Media Temperature - Maximum | 225 deg F |
| Flow Rate - Maximum | 115 gpm |
| Pump Casing Material | Bronze |
| Full Load Current | 2.6/5.2 A |
| Feet of Head - Maximum | 23 ft |
| Media Temperature - Minimum | 14 deg F |
| Motor Enclosure Design | Open Drip Proof |
| Includes Union | Not Applicable |
| For Discharge Pipe Diameter | 3 in |
| For Inlet Pipe Diameter | 3 in |
| Includes Volute | Volute Included |
| Revolutions Per Minute - Maximum | 1,750 rpm |
| Connection Standard | Flange |
| For Low Lead Compliance Level | CE |
| Includes Flange | Flange Included |
| Wire Rope Length | 20-1/4 in |
| Length | 20-1/4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |