AC Gearmotor, Number of Output Shafts 1, Motor Type 3-Phase, Motor Enclosure Totally Enclosed Nonventilated, Nameplate Speed 91 RPM, Maximum Torque 76 in-lb, Overhung Load Capacity 300 lb, Rotation CW/CCW, Output Shaft Height 2.5 in, Mounting Orientation Any Angle, Operating Voltage 230V AC, Inverter Rated Yes, Gear Ratio 18.8:1, Brake Type None, Shaft Orientation Parallel, Shaft Material Grade Type 304, Motor Insulation Class F, Application Washdown
| Item | AC Gearmotor |
|---|---|
| Gearmotor Voltage | 230V AC |
| Gearmotor Phase | 3 |
| Gearmotor Type | AC Gearmotor |
| Max. Torque | 70 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 91 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW, CCW |
| Gearmotor Brake Type | None |
| Length Less Shaft | 223 mm |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 0.5 A |
| Keyway Size Type | 6mm Square x 25mm |
| Standards | UL Listed |
| Input HP | 1/8 hp |
| Motor Type | 3-Phase |
| Shaft Orientation | Parallel |
| Gears | Steel |
| Housing | 304 Stainless Steel |
| Rotation | CW, CCW |
| Gear Case Material | 304 Stainless Steel |
| Keyway Size | 6mm Square x 25mm |
| Reversible Shaft Output | Yes |
| Shaft Dia. (Dimension U) | 20 mm |
| Hz | 60 |
| RPM @ 50 Hz | 61 |
| Starting Torque | 398 in-lb |
| Application | Washdown |
| RPM Range | 76 to 100 |
| Overall Length | 10.66 in |
| Includes | 2m Straight Connector Power Cord |
| Phase | Three |
| Finish | Unpainted |
| Insulation Class | F |
| Seals | Triple Lip Cartridge Seal With Stainless Slinger |
| Overhung Load | 300 lb |
| Shaft Length (Dimension V) | 40 mm |
| Voltage | 230V |
| No Load RPM | 98 RPM |
| Thermal Protection | None |
| Lubrication | Food Grade Grease |
| Max. Ambient Temp. | 40 deg C |
| Enclosure | TENV |
| Height (Dimension O) | 127 mm |
| Mounting | All Position |
| Gear Ratio | 18.8:1 |
| Gear Material | Steel |
| Bearings | Sealed Ball |
| Shaft | Single Output |
| Gear Type | Right-Angle |
| Housing Material | 304 Stainless Steel |
| Input Horsepower | 0.125 HP |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Inverter Rated | Yes |
| Maximum Ambient Temperature | 104 deg F |
| Mounting Orientation | Any Angle |
| Inverter Rating | 19:1 |
| Keyway Type | Rounded |
| Mount Hole Center-to-Center Length | 3.14 in |
| Motor Insulation Class | F |
| No Load Speed | 98 RPM |
| Brake Type | None |
| Keyway Width | 5 mm |
| Maximum Output Speed | 88 RPM |
| Overall Width | 3.92 in |
| Seal Type | Triple Lip Cartridge Seal With Stainless Slinger |
| Output Shaft Length | 1-1/2 in |
| Maximum Torque | 76 in-lb |
| Output Shaft Diameter | 13/16 in |
| Shaft Material Grade | Type 304 |
| Operating Voltage | 230V AC |
| Number of Output Shafts | 1 |
| Housing Material Finish | Unpainted |
| Nameplate Speed | 91 RPM |
| Bearing Type | Sealed Ball |
| Keyway Depth | 3/16 in |
| Overhung Load Capacity | 300 lb |
| Mount Type | Any Position |
| Frequency | 60 Hz |
| Overall Height | 3.92 in |
| Mount Hole Center-to-Center Width | 3.14 in |
| Full Load Current | 0.5 A |
| Output Shaft Height | 2-1/2 in |
| Wire Rope Length | 10.66 in |
| Length | 10.66 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |