DC Gearmotor,25RPM,90V, Shaft Orientation Parallel, Output Shaft Type Keyed, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Maximum Torque 111 in-lb, Overhung Load Capacity 150 lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 71.7:1, Input Horsepower 1/20 hp, Motor Insulation Class F, Output Shaft Diameter 1/2 in, Bearing Type Ball, Color Black
| Shaft Orientation | Parallel |
|---|---|
| Motor Type | Permanent Magnet DC |
| Rotation | CW/CCW |
| Gear Ratio | 71.7:1 |
| Gear Material | Powdered Metal (Spur), Steel (1st Stage) |
| Length Less Shaft | 8.28 in |
| Lubrication | Oil |
| Standards | RoHS Compliant |
| Item | DC Gearmotor,25RPM,90V |
| Overall Length | 9.7 in |
| Gear Type | Helical (1st Stage) |
| Housing Material | Aluminum |
| Overall Width | 3.6 in |
| Color | Black |
| Features | Accessory Shaft, Shaft Mount Encoder |
| Output Shaft Type | Keyed |
| Output Shaft Diameter | 1/2 in |
| Number of Housing Mount Holes | 4 |
| Motor Insulation Class | F |
| IP Rating | IP43 |
| Input Horsepower | 1/20 hp |
| Bearing Type | Ball |
| Number of Stages | 3 |
| Keyway Type | Square |
| Operating Voltage | 90 V DC |
| Keyway Length | 3/4 in |
| Keyway Width | 1/8 in |
| Full Load Current | 0.6 A |
| Overhung Load Capacity | 150 lb |
| Keyway Depth | 1/8 in |
| Mount Hole Center-to-Center Width | 1.88 in |
| Housing Mount Hole Size | 0.28 in |
| Motor Duty Class | Continuous |
| Shaft Material | Steel |
| Mount Hole Center-to-Center Length | 3-3/4 in |
| Vent Type | None |
| Maximum Torque | 111 in-lb |
| Maximum Output Speed | 25 rpm @ 130 V |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Housing Material Finish | Gloss Powder Coated |
| Mounting Orientation | Any Angle |
| Wire Rope Length | 9.7 in |
| Length | 9.7 in |
| Fits Chest Size | Accessory Shaft, Shaft Mount Encoder |
| Wire Color | Black |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |