| Item | Speed Reducer |
|---|---|
| Nominal Ratio | 30:1 |
| Input RPM | 1,750 RPM |
| Bore Dia. | 1-3/8 in |
| Nominal Output RPM | 58 RPM |
| Standards | AGMA |
| Overhung Load | 2,400 lb |
| Max. Output Torque | 9,603 in-lb |
| Gear Type | Worm |
| Finish | Powdered Epoxy Paint |
| Mounting | Any Position |
| Reducer Model No. | RF760-30-B11-G |
| Output Shaft Dia. | 2-1/4 in |
| Frame | 210TC/250UC |
| Output Torque @ 1/40 HP | 3,600 in-lb |
| Lubrication | Klubersynth UH1 6-460 |
| Solid/Hollow Output Shaft | Solid |
| Single/Double Output/Universal | Single Output |
| Pinion Material | Hardened Steel |
| Worm Center Distance | 6 in |
| Base | Optional |
| Duty | Standard |
| Shaft Orientation | Right Angle |
| Housing Material | Cast Iron |
| Output Shaft Height | 6-1/2 in |
| Max. Input HP | 9.8 hp |
| Number of Stages | 1 |
| Gear Material | Hardened and Ground Steel |
| Worm Gear Material | Bronze |
| Seal Type | Double Lip |
| Rotation | CCW, CW |
| Speed Reducer Type | C-Face |
| Dimension U | 2-1/4 in |
| Bearings | Roller |
| Maximum Output Speed | 58 RPM |
| Overhung Load Capacity | 2,400 lb |
| Base to Center | 6-1/2 in |
| Output Shaft Type | Round |
| Input Connection Type | C-Face |
| Output Shaft Diameter | 2-1/4 in |
| Housing Material Finish | Powder Coated Epoxy Paint |
| Input Shaft Diameter | 1-3/8 in |
| Maximum Input Speed | 1,750 rpm |
| Gear Ratio | 30:1 |
| Maximum Input Horsepower | 9.8 HP |
| Bearing Type | Roller |
| Mounting Orientation | Any Angle |
| Motor Frame Designation | 210TC/250UC |
| Maximum Output Torque | 9,603 in-lb |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |