Fan and Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 3/4 hp HP, Nameplate RPM 1,075 RPM, No. of Speeds 3, Voltage 208-230V AC, 4.09 A Full Load Amps, 48Y Frame, Output Watts 560W, 60 Hz Hz, Usable @ 208V Usable at 208V, Usable @ 200V Not Usable at 200V, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 50 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Air Over, Motor Mounting Type Resilient Ring
| Ins. Class | B |
|---|---|
| No. of Speeds | 3 |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Application | HVAC, R |
| Motor Thermal Protection | Auto |
| Hz | 60 |
| Motor Mounting Type | Ring |
| Voltage Compatibility | 115V AC, 208V AC to 230V AC, 200V AC to 230V AC, 208V AC to 220V AC, 440V AC, 208V AC to 230V AC, 277V AC, 208V AC to 230V AC, 440V AC, 208V AC to 230V AC, 460V AC, 208V AC to 230V AC, 208V AC to 240V AC |
| Body Dia. | 5-5/8 in |
| Application | Fan/Blower |
| Duty | Continuous |
| Includes | Belly Band, Resilient Mounting Ring |
| Motor Design | Permanent Split Capacitor |
| Resilient Ring Dia. | 2-1/4 in |
| Motor Shaft Design | Flat |
| Motor Shaft Rotation | CCW, CW |
| Motor Mounting Position | All Angle |
| Phase | Single |
| Shaft Dia. | 1/2 in |
| Shaft Length | 6-7/16 in |
| Voltage | 208V AC to 230V AC |
| Motor Enclosure Design | Open Air-Over |
| Motor Bearings | Ball |
| Nameplate RPM | 1,075 |
| Item | Fan and Blower Motor |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Capacitor Required | Capacitor Not Included |
| RPM Range | 1,001-1,100 |
| HP | 3/4 |
| Motor Service Factor | 1 |
| Max. Ambient Temp. | 50 deg C |
| Full Load Amps | 4.09 A |
| Length Less Shaft | 6-3/8 in |
| Frame | 48Y |
| Mounting Stud Location | 4/Shaft End |
| Standards | CSA Certified, UL Recognized |
| Stud Size | #8-32 |
| Ring to Ring Center | 5-15/16 in |
| Mounting Holes | (4) #8-32 |
| Usable @ 200V | Not Usable at 200V |
| Stud Quantity | 4 |
| Motor Frame Material | Steel |
| Overall Length | 12-5/16 in |
| Weight | 18 lb |
| Lead Length | 26 in |
| Usable @ 208V | 208V, Usable |
| Number of Shafts | 1 |
| Mounting | Stud |
| Number of Speeds | 3 |
| Motor Enclosure Type | Open Air Over |
| Insulation Class | B |
| Nameplate Service Factor @ 60 Hz | 1 |
| Product Type | Blower Motor, Fan |
| Drive Type | Direct Drive |
| Frame Size | 48Y |
| Frequency | 60 Hz |
| Bearing Type | Ball |
| Ambient Temperature - Maximum | 50 deg C |
| Frame Material | Steel |
| Mounting Position | All Angle |
| Body Diameter | 5.6 in |
| Sub Application | General Purpose |
| Wattage | 560 W |
| Full Load Current @ 60 Hz | 4.09 A |
| Mounting Stud Thread Size | #8 to 32 |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Stack Size | Not Applicable |
| Resilient Ring Diameter | 2-1/4 in |
| Shaft Design | Flat |
| Shaft Diameter | 1/2 in |
| Wire Rope Length | 12-5/16 in |
| Length | 12-5/16 in |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |