Jobber Length Drill Bit, Drill Bit Size 3/16 in, Drill Bit Point Angle 135 Degrees , Cobalt, TiAlN, Decimal Equivalent 0.1875, Fractional Inch, Drill Bit Point Type Split Point, Non-Coolant Through, Number of Coolant Holes 0
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 3-1/2 in |
| Drill Bit Point Angle | 135 deg |
| Drill Bit Size | 3/16 in |
| Number of Flutes | 2 |
| Shank Dia. | 3/16 in |
| Material - Machining | Cobalt |
| Cutting Direction | Right Hand |
| Finish - Machining | TiAlN |
| Shank Type - Machining | Straight |
| Number of Pieces | 1 |
| Depth:Dia. Ratio | 4 xD |
| Decimal Equivalent | 0.1875 |
| Drill Bit Grouping | Drill Bit |
| List Number | 550TA |
| Application | For Alloy, Stainless And Tool Steels And Titanium |
| Standards | NAS 907 Type J |
| Flute Length | 2-5/16 in |
| Drill Bit Dimension Type | Fractional Inch |
| Diameter | 0.1875 |
| Shank Size | 0.1875 |
| Shank Length | 1-3/16 in |
| Measurement System | Fractional Inch |
| Drill Style | Jobber Drill |
| Coolant Fed | Non-Coolant Through |
| Flute Type | Spiral |
| Helix Angle | 21 Degrees to 34 Degrees |
| Primary Material Application | Stainless Steel, Steel |
| Aircraft Drill | Yes |
| Maximum Drilling Depth | 1-47/64 in |
| Drill Diameter Tolerance | +0.0000 in/-0.0007 in |
| Spiral Direction | Right Hand |
| Drill Bit Point Type | Split Point |
| Series | 55TA |
| Primary Material Application ISO Code | P, M, S |
| Drill Point Length | 0.0388 in |
| Material Grade - Machining | M42 |
| Drill Length Class | Jobber-Length |
| Web Thinning | Thinned |
| Number of Coolant Holes | 0 |
| Sheeter Drill | No |
| Secondary Material Application ISO Code | N, S, H, K |
| Secondary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Hardened Steel, Titanium |
| Helix Angle - Minimum | 21 deg |
| Helix Angle - Maximum | 34 deg |
| Wire Rope Length | 3-1/2 in |
| Length | 3-1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |