Jobber Length Drill Bit, Drill Bit Size 7/64 in, Drill Bit Point Angle 135 Degrees , Cobalt, TiN, Decimal Equivalent 0.1094, Fractional Inch, Drill Bit Point Type Split Point, Non-Coolant Through, Number of Coolant Holes 0
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 2-5/8 in |
| Drill Bit Point Angle | 135 deg |
| Drill Bit Size | 7/64 in |
| Number of Flutes | 2 |
| Shank Dia. | 7/64 in |
| Material - Machining | Cobalt |
| Cutting Direction | Right Hand |
| Finish - Machining | TiN |
| Shank Type - Machining | Straight |
| Drill Bit Grouping | Drill Bit |
| Flute Length | 1-1/2 in |
| Standards | NAS 907 Type B |
| Application | For Drilling Stainless Steel, Alloy Steel and Titanium |
| Drill Bit Dimension Type | Fractional Inch |
| Depth:Dia. Ratio | 4 xD |
| Flute Type | Spiral |
| Decimal Equivalent | 0.1094 |
| List Number | 550ASP-TN |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 1-1/8 in |
| Helix Angle | 21 Degrees to 34 Degrees |
| Primary Material Application | Stainless Steel, Steel |
| Aircraft Drill | No |
| Drill Length Class | Jobber-Length |
| Series | 550ASP-TN |
| Maximum Drilling Depth | 1-1/8 in |
| Measurement System | Fractional Inch |
| Drill Bit Point Type | Split Point |
| Drill Point Length | 0.0227 in |
| Material Grade - Machining | M42 |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Primary Material Application ISO Code | P, M, S |
| Spiral Direction | Right Hand |
| Web Thinning | Thinned |
| Number of Coolant Holes | 0 |
| Sheeter Drill | No |
| Helix Angle - Minimum | 21 deg |
| Secondary Material Application ISO Code | N, K |
| Secondary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper |
| Helix Angle - Maximum | 34 deg |
| Wire Rope Length | 2-5/8 in |
| Length | 2-5/8 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |