Jobber Length Drill Bit, Drill Bit Size 8.5 mm, Drill Bit Point Angle 135 Degrees , High Speed Steel, Black Oxide, Decimal Equivalent 0.3346, Metric, Drill Bit Point Type Split Point, Non-Coolant Through, Number of Coolant Holes 0
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 117 mm |
| Drill Bit Point Angle | 135 deg |
| Drill Bit Size | 8.5 mm |
| Number of Flutes | 2 |
| Shank Dia. | 8.5 mm |
| Material - Machining | High Speed Steel |
| Cutting Direction | Right Hand |
| Finish - Machining | Black Oxide |
| Shank Type - Machining | Straight |
| Drill Bit Grouping | Drill Bit |
| List Number | 150ASP |
| Drill Bit Dimension Type | Metric |
| Depth:Dia. Ratio | 4 xD |
| Flute Length | 75 mm |
| Decimal Equivalent | 0.3346 |
| Number of Pieces | 1 |
| Standards | NAS 907 Type B |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 42 mm |
| Helix Angle | 21 Degrees to 34 Degrees |
| Flute Type | Spiral |
| Primary Material Application | Cast Iron, Stainless Steel, Steel |
| Maximum Drilling Depth | 2-13/64 in |
| Aircraft Drill | Yes |
| Spiral Direction | Right Hand |
| Measurement System | Metric |
| Drill Length Class | Jobber-Length |
| Drill Bit Point Type | Split Point |
| Drill Point Length | 0.0693 mm |
| Primary Material Application ISO Code | P, K, M |
| Drill Diameter Tolerance | +0.0000 in/-0.0010 in |
| Series | 150ASP |
| Sheeter Drill | No |
| Web Thinning | Thinned |
| Number of Coolant Holes | 0 |
| Material Grade - Machining | Heavy Duty |
| Helix Angle - Minimum | 21 deg |
| Secondary Material Application | Aluminum, Brass, Bronze, Copper |
| Secondary Material Application ISO Code | N |
| Helix Angle - Maximum | 34 deg |
| Wire Rope Length | 117 mm |
| Length | 117 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |