Straight Flute Tap, Thread Size 3/4 In.-16, UNF, Semi-Bottoming, Overall Length 4.25 in, Cobalt, Black Oxide/Nitride, Right Hand, Thread Length 1.22 in, 75 Percent Thread Drill Size 17.50 mm, Thread Limit H5, Class of Fit 2B-3B
| Item | Straight Flute Hand Tap |
|---|---|
| Tap Thread Size | 3/4"-16 |
| Tap Chamfer | Semi-Bottoming |
| Number of Flutes | 6 |
| Tap Thread Type | UNF |
| Shank Dia. | 0.590" |
| Tap Dimension Type | Inch |
| Tap Grouping | Tap |
| Tap Finish | Nitride, Steam Oxide |
| Thread Direction | Right Hand |
| Pitch Diameter Limit | H5 |
| Tap Material | Cobalt |
| Thread Length | 1-7/32 in |
| Standards | USCTI Table 302A |
| Tap Size | 3/4" |
| Tap Style | Straight Flute |
| Number of Pieces | 1 |
| List Number | HTHM |
| Overall Length | 4-1/4 in |
| Cutting Direction - Machining | Right Hand |
| Primary Material Application | Cast Iron, Hardened Steel |
| Series | HTHM |
| Thread Limit | H5 |
| Square Size | 0.442 in |
| Spiral Direction | Neutral |
| Shank Length | 2-1/4 in |
| Thread Standard | UNF |
| Primary Material Application ISO Code | K, H |
| Thread Size | 3/4"-16 |
| Extended Neck | Yes |
| Tap Length Standard | USCTI |
| Threads per Inch | 16 |
| 75% Thread Drill Size | 17.5 mm |
| Measurement System | Fractional Inch |
| 65% Thread Drill Size | 17.7 mm |
| Shank Type - Machining | Straight |
| 55% Thread Drill Size | 17.9 mm |
| Class of Fit | 2B-3B |
| Tap Shank Standard | USCTI |
| Helix Angle | 0 deg |
| Size | 3/4" |
| Square Length | 0.44 in |
| Impact Rated | Not Impact Rated |
| Secondary Material Application | Not Applicable |
| Shank Type | Square |
| Secondary Material Application ISO Code | Not Applicable |
| Shank Diameter | 0.59 in |
| Tap Application | Through Hole, Blind Hole |
| Features | CNC Machine Tap |
| Square Width | 0.44 in |
| Wire Rope Length | 4-1/4 in |
| Length | 4-1/4 in |
| Fits Chest Size | CNC Machine Tap |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |