Reduced Shank Drill Bit, Drill Bit Size 19.5 mm, 118 Degrees Drill Bit Point Angle, Material - Machining High Speed Steel, Finish - Machining Black Oxide
| Item | Reduced Shank Drill Bit |
|---|---|
| Material - Machining | High Speed Steel |
| Finish - Machining | Black Oxide |
| Overall Length | 6 in |
| Shank Dia. | 1/2 in |
| Shank Type - Machining | Straight |
| Drill Bit Size | 19.5 mm |
| Drill Bit Point Type | Conventional Point |
| Flute Length | 3-1/8 in |
| Number of Flutes | 2 |
| Depth:Dia. Ratio | 4xD |
| Decimal Equivalent | 0.7677 |
| Flute Type | Spiral |
| Drill Bit Dimension Type | Metric |
| Application | For Alloy And Carbon Steel, Cast Iron And Wood |
| Drill Bit Point Angle | 118 deg |
| List Number | 1,813 M |
| Cutting Direction | Right Hand |
| Coolant Fed | Non-Coolant Through |
| Standards | Not Rated |
| Silver & Deming Drill | Yes |
| Shank Length | 57.15 mm |
| Primary Material Application ISO Code | P, K |
| Helix Angle | 28 deg |
| Drill Diameter Tolerance | +0.0000 in/-0.0012 in |
| Measurement System | Metric |
| Primary Material Application | Cast Iron, Steel |
| Maximum Drilling Depth | 3-1/16 in |
| Spiral Direction | Right Hand |
| Series | 1813M |
| Secondary Material Application | Aluminum, Brass, Bronze, Copper |
| Helix Angle - Minimum | 30 deg |
| Secondary Material Application ISO Code | N |
| Helix Angle - Maximum | 34 Degrees |
| Wire Rope Length | 6 in |
| Length | 6 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |