Jobber Length Drill Bit, Drill Bit Size 1/16 in, Drill Bit Point Angle 135 Degrees , Cobalt, Straw/Bronze, Decimal Equivalent 0.0625, Fractional Inch, Drill Bit Point Type Split Point, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 1-7/8 in |
| Drill Bit Point Angle | 135 deg |
| Drill Bit Size | 1/16 in |
| Number of Flutes | 2 |
| Shank Dia. | 1/16 in |
| Material - Machining | Cobalt |
| Cutting Direction | Right Hand |
| Finish - Machining | Bronze, Straw |
| Shank Type - Machining | Hex |
| Decimal Equivalent | 0.0625 |
| Standards | ASME B94.11M |
| Number of Pieces | 1 |
| Flute Type | Spiral |
| Flute Length | 7/8 in |
| List Number | 1804 |
| Drill Bit Dimension Type | Fractional Inch |
| Application | Aluminum, Alloy Steel, Cast Iron |
| Depth:Dia. Ratio | 4 xD |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application | Brass, Bronze, Copper, Cast Iron, Aluminum, Steel |
| Primary Material Application ISO Code | P, K, N |
| Spiral Direction | Right Hand |
| Measurement System | Fractional Inch |
| Shank Length | 1 in |
| Helix Angle | 21 Degrees to 34 Degrees |
| Series | 1804 |
| Drill Bit Point Type | Split Point |
| Material Grade - Machining | M35 |
| Maximum Drilling Depth | 1/4 in |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Drill Length Class | Jobber-Length |
| Drill Point Length | 0.0188 |
| Shank Hex Size | 1/16 in |
| Web Construction | Tapered |
| Helix Angle - Maximum | 34 deg |
| Secondary Material Application ISO Code | M |
| Secondary Material Application | Stainless Steel |
| Helix Angle - Minimum | 21 deg |
| Wire Rope Length | 1-7/8 in |
| Length | 1-7/8 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |