Jobber Length Drill Bit, Drill Bit Size #37, Drill Bit Point Angle 135 Degrees , Cobalt High Speed Steel, TiN Tip, Decimal Equivalent 0.1040, Wire, Drill Bit Point Type Split Point, Non-Coolant Through, Number of Coolant Holes 0
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 2-1/2 in |
| Drill Bit Point Angle | 135 deg |
| Drill Bit Size | #37 |
| Number of Flutes | 2 |
| Shank Dia. | 2.6 mm |
| Material - Machining | High Speed Steel |
| Cutting Direction | Right Hand |
| Finish - Machining | Tip |
| Shank Type - Machining | Straight |
| Primary Material Application ISO Code | P, K, N |
| Primary Material Application | Brass, Bronze, Copper, Cast Iron, Aluminum, Steel |
| Flute Length | 1-7/16 in |
| Flute Type | Spiral |
| List Number | 1501-TT |
| Decimal Equivalent | 0.104 |
| Measurement System | Wire |
| Coolant Fed | Non-Coolant Through |
| Depth:Dia. Ratio | 4 xD |
| Shank Length | 1-1/16 in |
| Standards | ASME B94.11M |
| Spiral Direction | Right Hand |
| Drill Length Class | Jobber-Length |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Helix Angle | 21 Degrees to 34 Degrees |
| Drill Bit Point Type | Split Point |
| Sheeter Drill | No |
| Web Construction | Split |
| Maximum Drilling Depth | 1-1/16 in |
| Web Thinning | Thinned |
| Aircraft Drill | No |
| Number of Coolant Holes | 0 |
| Material Grade - Machining | M35 |
| Secondary Material Application ISO Code | N, M |
| Helix Angle - Maximum | 34 deg |
| Secondary Material Application | Aluminum, Brass, Bronze, Copper, Stainless Steel |
| Helix Angle - Minimum | 21 deg |
| Wire Rope Length | 2-1/2 in |
| Length | 2-1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |