Straight Flute Tap, Thread Size 7/16 In.-20, UNF, Plug, Overall Length 3.16 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1.44 in, 75 Percent Thread Drill Size 9.95 mm, Thread Limit H3, Class of Fit 3B
| Item | Straight Flute Hand Tap |
|---|---|
| Shank Dia. | 0.323 in |
| Tap Material | High Speed Steel |
| Tap Chamfer | Plug |
| Tap Style | Straight Flute |
| Tap Dimension Type | Inch |
| Number of Flutes | 2 |
| Overall Length | 3-5/32 in |
| Thread Direction | Right Hand |
| Tap Thread Type | UNF |
| Tap Grouping | Tap |
| Standards | USCTI Table 302 |
| Number of Pieces | 1 |
| List Number | 1870TN |
| Tap Finish | Bright |
| Thread Length | 1-7/16 in |
| Tap Thread Size | 7/16"-20 |
| Pitch Diameter Limit | H3 |
| Cutting Direction - Machining | Right Hand |
| Series | 402 |
| Tap Shank Standard | USCTI |
| 75% Thread Drill Size | 9.95 mm |
| Shank Type - Machining | Straight |
| Thread Standard | UNF |
| Threads per Inch | 20 |
| Tap Length Standard | USCTI |
| Measurement System | Fractional Inch |
| Thread Size | 7/16"-20 |
| Thread Limit | H3 |
| 65% Thread Drill Size | 10 mm |
| Square Size | 0.242 in |
| 55% Thread Drill Size | 10.2 mm |
| Spiral Direction | Neutral |
| Extended Neck | Yes |
| Shank Length | 1-23/32 in |
| Primary Material Application ISO Code | K, N, P |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Steel |
| Class of Fit | 3 B |
| Helix Angle | 0 Degrees |
| Shank Diameter | 0.323 in |
| Secondary Material Application | Not Applicable |
| Shank Type | Square |
| Square Width | 0.24 in |
| Secondary Material Application ISO Code | Not Applicable |
| Square Length | 0.24 in |
| Tap Application | Through Hole, Blind Hole |
| Impact Rated | Not Impact Rated |
| Wire Rope Length | 3.16 in |
| Length | 3.16 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |