Jobber Length Drill Bit, Drill Bit Size #30, Drill Bit Point Angle 118 Degrees , High Speed Steel, Bright (Uncoated), Decimal Equivalent 0.1285, Wire, Drill Bit Point Type Split Point, Non-Coolant Through, Number of Coolant Holes 0
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 2-3/4 in |
| Drill Bit Point Angle | 118 deg |
| Drill Bit Size | #30 |
| Number of Flutes | 2 |
| Shank Dia. | 3.2 mm |
| Material - Machining | High Speed Steel |
| Cutting Direction | Right Hand |
| Finish - Machining | Bright |
| Shank Type - Machining | Straight |
| Decimal Equivalent | 0.1285 |
| Flute Type | Spiral |
| Number of Pieces | 12 |
| Application | General Purpose Operations, Carbon Steel, Cast Iron, Non-Ferrous Materials |
| Drill Bit Grouping | Drill Bit |
| Flute Length | 1-5/8 in |
| Drill Bit Dimension Type | Wire |
| Standards | NAS 907 Type A |
| List Number | 2228 |
| Coolant Fed | Non-Coolant Through |
| Depth:Dia. Ratio | 4 xD |
| Shank Length | 1-1/8 in |
| Helix Angle | 21 Degrees to 34 Degrees |
| Primary Material Application | Brass, Bronze, Copper, Aluminum, Steel |
| Secondary Material Application | Stainless Steel |
| Series | 2228 |
| Drill Point Length | 0.0386 in |
| Drill Diameter Tolerance | +0.0000 in/-0.0007 in |
| Aircraft Drill | Yes |
| Measurement System | Wire |
| Material Grade - Machining | General Purpose |
| Primary Material Application ISO Code | P, N |
| Spiral Direction | Right Hand |
| Maximum Drilling Depth | 1-7/32 in |
| Drill Length Class | Jobber-Length |
| Secondary Material Application ISO Code | M |
| Drill Bit Point Type | Split Point |
| Number of Coolant Holes | 0 |
| Web Thinning | Thinned |
| Sheeter Drill | No |
| Helix Angle - Maximum | 34 deg |
| Helix Angle - Minimum | 21 deg |
| Wire Rope Length | 2-3/4 in |
| Length | 2-3/4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |