Extra Long Drill Bit, Drill Bit Size 5/16 in, Drill Bit Point Angle 118 Degrees , Notched Point, High Speed Steel, Black Oxide, 28 Degrees , Material Grade - Machining General Purpose, Maximum Drilling Depth 7 1/2 in, Fractional Inch, 4xD
| Item | Extra Long Drill Bit |
|---|---|
| Drill Bit Size | 5/16 in |
| Overall Length | 10 in |
| Drill Bit Point Angle | 118 deg |
| Material - Machining | High Speed Steel |
| Finish - Machining | Black Oxide |
| Number of Flutes | 2 |
| Shank Type - Machining | Straight |
| Drill Bit Grouping | Drill Bit |
| Depth:Dia. Ratio | 4 xD |
| Flute Length | 7-1/2 in |
| Decimal Equivalent | 0.3125 |
| Flute Type | Spiral |
| Number of Pieces | 0 |
| Cutting Direction | Right Hand |
| Standards | ASME B94.11M |
| Shank Dia. | 5/16 in |
| Shank Size | 5/16" |
| List Number | 950E |
| Coolant Fed | Non-Coolant Through |
| Series | 950E |
| Helix Angle | 28 Degrees |
| Primary Material Application | Cast Iron, Steel |
| Drill Length Class | Extended-Length |
| Maximum Drilling Depth | 7-1/2 in |
| Secondary Material Application | Cast Iron |
| Secondary Material Application ISO Code | K |
| Measurement System | Fractional Inch |
| Drill Diameter Tolerance | +0.0000 in/-0.0010 in |
| Material Grade - Machining | General Purpose |
| Spiral Direction | Right Hand |
| Drill Point Length | 0.0939 in |
| Primary Material Application ISO Code | P, K |
| Drill Bit Point Type | Notched Point |
| Shank Length | 2-1/2 in |
| Diameter | 5/16 in |
| Helix Angle - Maximum | 34 Degrees |
| Helix Angle - Minimum | 21 Degrees |
| Wire Rope Length | 10 in |
| Length | 10 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |