Jobber Length Drill Bit, Drill Bit Size 3/16 in, Drill Bit Point Angle 118 Degrees , Carbide, Bright (Uncoated), Decimal Equivalent 0.1875, Fractional Inch, Drill Bit Point Type 4 Facet Point, Non-Coolant Through, Number of Coolant Holes 0
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 2-3/4 in |
| Drill Bit Point Angle | 118 deg |
| Drill Bit Size | 3/16 in |
| Number of Flutes | 2 |
| Shank Dia. | 3/16 in |
| Material - Machining | Carbide |
| Cutting Direction | Right Hand |
| Finish - Machining | Bright |
| Shank Type - Machining | Straight |
| Drill Bit Grouping | Drill Bit |
| Depth:Dia. Ratio | 4 xD |
| List Number | 1727 |
| Decimal Equivalent | 0.1875 |
| Drill Bit Dimension Type | Fractional Inch |
| Standards | ASME B94.11M-1993 |
| Flute Length | 1-5/8 in |
| Shank Length | 1-1/8 in |
| Shank Size | 0.1875 |
| Diameter | 0.1875 |
| Drill Style | Jobber Drill |
| Measurement System | Fractional Inch |
| Flute Type | Spiral |
| Coolant Fed | Non-Coolant Through |
| Helix Angle | 10 Degrees to 20 Degrees |
| Primary Material Application | Brass, Bronze, Copper, Cast Iron, Aluminum |
| Spiral Direction | Right Hand |
| Drill Length Class | Jobber-Length |
| Secondary Material Application | Stainless Steel, Steel |
| Drill Bit Point Type | 4 Facet Point |
| Drill Diameter Tolerance | +0.0000 in/-0.0007 in |
| Primary Material Application ISO Code | K, N |
| Series | 1727 |
| Secondary Material Application ISO Code | M, P |
| Drill Point Length | 0.0563 in |
| Maximum Drilling Depth | 1-7/32 in |
| Aircraft Drill | No |
| Sheeter Drill | No |
| Web Thinning | Thinned |
| Number of Coolant Holes | 0 |
| Helix Angle - Maximum | 20 deg |
| Helix Angle - Minimum | 10 deg |
| Wire Rope Length | 2-3/4 in |
| Length | 2-3/4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |