Taper Length Drill Bit, Drill Bit Size 1/16 in, Drill Bit Point Angle 118 Degrees , Conventional Point, High Speed Steel, Black Oxide
| Item | Taper Length Drill Bit |
|---|---|
| Drill Bit Size | 1/16 in |
| Overall Length | 3 in |
| Number of Flutes | 2 |
| Material - Machining | High Speed Steel |
| Finish - Machining | Black Oxide |
| Drill Bit Point Angle | 118 deg |
| Drill Bit Point Type | Conventional Point |
| Flute Length | 1-3/4 in |
| Shank Dia. | 1/16 in |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Coolant Fed | Non-Coolant Through |
| Sizes Included | 1/16" |
| Drill Bit Grouping | Drill Bit |
| List Number | 2510 |
| Standards | ASME B94.11M-1993 |
| Decimal Equivalent | 0.0625 |
| Depth:Dia. Ratio | 4 xD |
| Shank Length | 1-1/4 in |
| Spiral Direction | Right Hand |
| Shank Type - Machining | Straight |
| Series | 2510 |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Drill Point Length | 0.0188 in |
| Drill Length Class | Taper Length |
| Material Grade - Machining | General Purpose |
| Helix Angle | 21 Degrees /34 Degrees |
| Maximum Drilling Depth | 1-3/4 in |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application ISO Code | P, K |
| Measurement System | Fractional Inch |
| Secondary Material Application | Brass, Bronze, Copper, Aluminum |
| Helix Angle - Minimum | 21 deg |
| Helix Angle - Maximum | 34 deg |
| Secondary Material Application ISO Code | N |
| Wire Rope Length | 3 in |
| Length | 3 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |