Taper Shank Drill Bit, Drill Bit Size 3/8 in, Drill Bit Point Angle 118 Degrees , Conventional Point, High Speed Steel, Black Oxide
| Item | Taper Shank Drill Bit |
|---|---|
| Drill Bit Size | 3/8 in |
| Overall Length | 6 3/4 in |
| Number of Flutes | 2 |
| Material - Machining | High Speed Steel |
| Finish - Machining | Black Oxide |
| Drill Bit Point Angle | 118 Degrees |
| Flute Length | 3-1/2 in |
| Cutting Direction | Right Hand |
| Shank Type - Machining | Morse Taper |
| Decimal Equivalent | 0.375 |
| List Number | 2410 |
| Standards | ASME B94.11M-1993 |
| Flute Type | Spiral |
| Coolant Fed | Non-Coolant Through |
| Depth:Dia. Ratio | 4 xD |
| Series | 2410 |
| Primary Material Application | Cast Iron, Steel |
| Measurement System | Fractional Inch |
| Secondary Material Application | Cast Iron |
| Primary Material Application ISO Code | P, K |
| Drill Bit Point Type | Conventional Point |
| Taper Shank Size | MT1 |
| Drill Diameter Tolerance | +0.0000 in/-0.0010 in |
| Secondary Material Application ISO Code | K |
| Material Grade - Machining | General Purpose |
| Maximum Drilling Depth | 3-1/2 in |
| Spiral Direction | Right Hand |
| Helix Angle | 21 Degrees to 34 Degrees |
| Drill Length Class | Taper Shank |
| Helix Angle - Minimum | 21 deg |
| Helix Angle - Maximum | 34 deg |
| Wire Rope Length | 6-3/4 in |
| Length | 6-3/4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |