Jobber Length Drill Bit, Drill Bit Size 1.3 mm, Drill Bit Point Angle 135 Degrees , Cobalt, Straw/Bronze, Decimal Equivalent 0.0512, Metric, Drill Bit Point Type Split Point, Non-Coolant Through, Number of Coolant Holes 0
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 38 mm |
| Drill Bit Point Angle | 135 deg |
| Drill Bit Size | 1.3 mm |
| Number of Flutes | 2 |
| Shank Dia. | 1.3 mm |
| Material - Machining | Cobalt |
| Cutting Direction | Right Hand |
| Finish - Machining | Bronze, Straw |
| Shank Type - Machining | Straight |
| Number of Pieces | 12 |
| Application | Stainless Steel, Alloy Steel, Titanium, For Abrasion Resistance |
| Drill Bit Grouping | Drill Bit |
| Standards | NAS 907 Type J |
| Decimal Equivalent | 0.0512 |
| Flute Type | Spiral |
| Drill Bit Dimension Type | Metric |
| Flute Length | 16 mm |
| List Number | 2213 |
| Coolant Fed | Non-Coolant Through |
| Depth:Dia. Ratio | 4 xD |
| Shank Length | 22 mm |
| Helix Angle | 21 Degrees to 34 Degrees |
| Primary Material Application | Brass, Bronze, Copper, Aluminum, Stainless Steel, Steel |
| Drill Length Class | Jobber-Length |
| Measurement System | Metric |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Drill Bit Point Type | Split Point |
| Primary Material Application ISO Code | P, N, M |
| Secondary Material Application ISO Code | S, K |
| Series | 2213 |
| Drill Point Length | 0.0106 mm |
| Secondary Material Application | Cast Iron |
| Maximum Drilling Depth | 15/32 in |
| Aircraft Drill | Yes |
| Material Grade - Machining | M42 |
| Spiral Direction | Right Hand |
| Sheeter Drill | No |
| Web Thinning | Thinned |
| Number of Coolant Holes | 0 |
| Helix Angle - Maximum | 34 deg |
| Helix Angle - Minimum | 21 deg |
| Wire Rope Length | 38 mm |
| Length | 38 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |