Square End Mill, 0.4375 in Milling Dia., Cobalt, TiN, Non-Coolant Through, Weldon Flat, Length of Cut 1 in, Overall Length 2 11/16 in, Shank Dia. 3/8 in, Neck Dia. Not Applicable
| Milling Diameter | 7/16 in |
|---|---|
| Length of Cut | 1 in |
| Overall Length | 2-11/16 in |
| Shank Dia. | 3/8 in |
| Helix Angle | 30 deg |
| List Number | HGC-4C-TN |
| End Mill Material | Cobalt |
| Corner Radius | 2-11/16 in |
| Single End/Double End | Single |
| End Mill Style | Square |
| Item | Square End Mill |
| End Mill Application | Finishing |
| Milling Dia. | 7/16 in |
| Dimension Type | Fractional Inch |
| Finish | TiN |
| Grade | General Purpose |
| End Mill Cutting Type | Center Cutting |
| Number of Flutes | 4 |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Measurement System | Inch |
| Shank Type - Machining | Weldon Flat |
| Drilling Tool Configuration | Individual |
| Material - Machining | Cobalt |
| Neck Length | Not Applicable |
| Neck Dia. | Not Applicable |
| Finish - Machining | TiN |
| Material Grade - Machining | General Purpose |
| Primary Material Application | Stainless Steel, Steel |
| Primary Material Application ISO Code | P, M |
| Chip-Breaker | No |
| Pitch | Not Applicable |
| Flute Spacing | Fixed |
| Flute Type | Spiral |
| Secondary Material Application ISO Code | S |
| Coolant Fed | Non-Coolant Through |
| Series | Not Applicable |
| Max. Helix Angle | 30 deg |
| Secondary Material Application | Titanium, Nickel |
| Min. Helix Angle | Not Applicable |
| Wire Rope Length | 2-11/16 in |
| Length | 2-11/16 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |