Square End Mill, 0.53125 in Milling Dia., High Speed Steel, TiCN, Weldon Flat, Length of Cut 1.375 in, Overall Length 5 in, Shank Dia. 5/8 in, Neck Dia. Not Applicable
| Dimension Type | Fractional Inch |
|---|---|
| Milling Diameter | 17/32 in |
| End Mill Material | High Speed Steel |
| Number of Flutes | 4 |
| Length of Cut | 1-3/8 in |
| Single End/Double End | Double |
| End Mill Cutting Type | Center Cutting |
| Grade | General Purpose |
| Shank Dia. | 5/8 in |
| Overall Length | 5 in |
| Corner Radius | 0 in |
| Stainless (M) Compatibility | No |
| Cast Iron (K) Compatibility | Yes |
| Hardened (H) Compatibility | No |
| Helix Angle | 30 deg |
| Steel (P) Compatibility | Yes |
| Non Ferrous (N) Compatibility | Yes |
| End Mill Style | Square |
| Super Alloy (S) Compatibility | No |
| Finish | TiCN |
| List Number | HD-4C-TC |
| End Mill Application | Finishing |
| Item | Square End Mill |
| Milling Dia. | 17/32 in |
| Shank Type | Weldon |
| Cutting Direction | Right Hand |
| Pitch | Not Applicable |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Measurement System | Inch |
| Shank Type - Machining | Weldon Flat |
| Drilling Tool Configuration | Individual |
| Cutting Direction - Machining | Right Hand |
| Material - Machining | High Speed Steel |
| Finish - Machining | TiCN |
| Material Grade - Machining | General Purpose |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application ISO Code | P, K |
| Chip-Breaker | No |
| Series | Not Applicable |
| Secondary Material Application | Aluminum |
| Secondary Material Application ISO Code | N |
| Flute Spacing | Fixed |
| Max. Helix Angle | 30 deg |
| Wire Rope Length | 5 in |
| Length | 5 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |