Jobber Length Drill Bit, Drill Bit Size #52, Drill Bit Point Angle 135 Degrees , Cobalt, Black Oxide, Decimal Equivalent 0.0635, Wire, Drill Bit Point Type Split Point, Non-Coolant Through, Number of Coolant Holes 0
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 1-7/8 in |
| Drill Bit Point Angle | 135 deg |
| Drill Bit Size | #52 |
| Number of Flutes | 2 |
| Shank Dia. | 1.6 mm |
| Material - Machining | Cobalt |
| Cutting Direction | Right Hand |
| Finish - Machining | Black Oxide |
| Shank Type - Machining | Straight |
| Decimal Equivalent | 0.0635 |
| Flute Type | Spiral |
| List Number | 3780 |
| Flute Length | 11/16 in |
| Drill Bit Dimension Type | Wire |
| Drill Bit Grouping | Drill Bit |
| Application | Alloy Steel, Tool Steel, Carbon Steel, Stainless Steel, Inconel |
| Standards | ASME B94.11M |
| Depth:Dia. Ratio | 4 xD |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 1-3/16 in |
| Helix Angle | 35 Degrees to 45 Degrees |
| Primary Material Application | Cast Iron, Stainless Steel, Steel |
| Spiral Direction | Right Hand |
| Material Grade - Machining | M42 |
| Drill Bit Point Type | Split Point |
| Primary Material Application ISO Code | P, K, M, S |
| Series | 3780 |
| Measurement System | Wire |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Maximum Drilling Depth | 1/2 in |
| Drill Length Class | Jobber-Length |
| Drill Point Length | 0.0132 in |
| Number of Coolant Holes | 0 |
| Sheeter Drill | No |
| Web Thinning | Thinned |
| Aircraft Drill | No |
| Secondary Material Application | Titanium |
| Secondary Material Application ISO Code | S |
| Helix Angle - Minimum | 35 deg |
| Helix Angle - Maximum | 45 deg |
| Wire Rope Length | 1-7/8 in |
| Length | 1-7/8 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |