Screw Machine Drill Bit, Drill Bit Size 1/2 in, Drill Bit Point Angle 118 Degrees , Conventional Point, High Speed Steel, Bright (Uncoated), Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.5000
| Item | Screw Machine Drill Bit |
|---|---|
| Drill Bit Size | 1/2 in |
| Overall Length | 3-3/4 in |
| Flute Length | 2-1/4 in |
| Number of Flutes | 2 |
| Material - Machining | High Speed Steel |
| Finish - Machining | Bright |
| Drill Bit Point Angle | 118 deg |
| Cutting Direction | Right Hand |
| Number of Pieces | 0 |
| List Number | 2120 |
| Sizes Included | 1/2" |
| Flute Type | Spiral |
| Decimal Equivalent | 0.5 |
| Grade | General Purpose |
| Shank Size | 1/2" |
| Standards | ASME B94.11M-1993 |
| Bit Dia. | 1/2" |
| Drilling Length | 2-1/4 in |
| Shank Dia. | 1/2 in |
| Drill Bit Grouping | Drill Bit |
| Coolant Fed | Non-Coolant Through |
| Depth:Dia. Ratio | 4 xD |
| Series | 2120 |
| Spiral Direction | Right Hand |
| Drill Point Length | 0.1502 in |
| Drill Bit Point Type | Conventional Point |
| Maximum Drilling Depth | 2-1/4 in |
| Shank Length | 1-1/2 in |
| Secondary Material Application ISO Code | P, K |
| Drill Length Class | Screw-Machine Length |
| Material Grade - Machining | General Purpose |
| Drill Diameter Tolerance | +0.0000 in/-0.0010 in |
| Primary Material Application | Aluminum, Brass, Bronze, Copper |
| Helix Angle | 28 deg |
| Measurement System | Fractional Inch |
| Primary Material Application ISO Code | N |
| Shank Type - Machining | Straight |
| Secondary Material Application | Cast Iron, Steel |
| Helix Angle - Minimum | 21 deg |
| Helix Angle - Maximum | 34 deg |
| Wire Rope Length | 3-3/4 in |
| Length | 3-3/4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |