Screw Machine Drill Bit, Drill Bit Size 43/64 in, Drill Bit Point Angle 135 Degrees , Split Point, Cobalt, TiAlN, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.6719
| Item | Screw Machine Drill Bit |
|---|---|
| Drill Bit Size | 43/64 in |
| Overall Length | 4-5/8 in |
| Flute Length | 2-7/8 in |
| Number of Flutes | 2 |
| Material - Machining | Cobalt |
| Finish - Machining | TiAlN |
| Drill Bit Point Angle | 135 deg |
| Cutting Direction | Right Hand |
| Bit Dia. | 43/64" |
| Shank Size | 43/64" |
| Shank Dia. | 43/64 in |
| Standards | ASME B94.11M-1993 |
| Flute Type | Parabolic |
| Sizes Included | 43/64" |
| List Number | 2175-TA |
| Drilling Length | 2-7/8 in |
| Grade | M42 |
| Number of Pieces | 0 |
| Drill Bit Grouping | Drill Bit |
| Decimal Equivalent | 0.6719 |
| Depth:Dia. Ratio | 10 xD |
| Coolant Fed | Non-Coolant Through |
| Series | 2175-TA |
| Drill Length Class | Screw-Machine Length |
| Helix Angle | 40 deg |
| Measurement System | Fractional Inch |
| Drill Bit Point Type | Split Point |
| Maximum Drilling Depth | 2-7/8 in |
| Shank Length | 1-3/4 in |
| Drill Point Length | 0.1391 in |
| Primary Material Application ISO Code | K, M |
| Spiral Direction | Right Hand |
| Material Grade - Machining | M42 |
| Shank Type - Machining | Straight |
| Primary Material Application | Cast Iron, Stainless Steel |
| Drill Diameter Tolerance | +0.0000 in/-0.0012 in |
| Secondary Material Application ISO Code | N, H, S, P |
| Helix Angle - Minimum | 35 deg |
| Secondary Material Application | Brass, Bronze, Copper, Titanium, Aluminum, Hardened Steel, Steel |
| Helix Angle - Maximum | 45 deg |
| Wire Rope Length | 4-5/8 in |
| Length | 4-5/8 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |